/* $NetBSD: cpu.h,v 1.49.4.2 2023/02/15 19:28:29 martin Exp $ */ /* * Copyright (c) 1988 University of Utah. * Copyright (c) 1982, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah $Hdr: cpu.h 1.16 91/03/25$ * * @(#)cpu.h 8.4 (Berkeley) 1/5/94 */ #ifndef _MACHINE_CPU_H_ #define _MACHINE_CPU_H_ #if defined(_KERNEL_OPT) #include "opt_lockdebug.h" #include "opt_m68k_arch.h" #endif /* * Get common m68k definitions. */ #include #if defined(_KERNEL) /* * Exported definitions unique to next68k/68k cpu support. */ #define M68K_MMU_MOTOROLA /* * Get interrupt glue. */ #include /* * Arguments to hardclock and gatherstats encapsulate the previous * machine state in an opaque clockframe. On the next68k, we use * what the hardware pushes on an interrupt (frame format 0). */ struct clockframe { u_short sr; /* sr at time of interrupt */ u_long pc; /* pc at time of interrupt */ u_short fmt:4, vec:12; /* vector offset (4-word frame) */ } __attribute__((packed)); #define CLKF_USERMODE(framep) (((framep)->sr & PSL_S) == 0) #define CLKF_PC(framep) ((framep)->pc) /* * The clock interrupt handler can determine if it's a nested * interrupt by checking for interrupt_depth > 1. * (Remember, the clock interrupt handler itself will cause the * depth counter to be incremented). */ extern volatile unsigned int interrupt_depth; #define CLKF_INTR(framep) (interrupt_depth > 1) /* * Preempt the current process if in interrupt from user mode, * or after the current trap/syscall if in system mode. */ #define cpu_need_resched(ci,flags) do { \ __USE(flags); \ ci->ci_want_resched = 1; \ aston(); \ } while (/*CONSTCOND*/0) /* * Give a profiling tick to the current process when the user profiling * buffer pages are invalid. On the next68k, request an ast to send us * through trap, marking the proc as needing a profiling tick. */ #define cpu_need_proftick(l) ((l)->l_pflag |= LP_OWEUPC, aston()) /* * Notify the current process (p) that it has a signal pending, * process as soon as possible. */ #define cpu_signotify(l) aston() #define aston() (astpending++) extern int astpending; /* need to trap before returning to user mode */ extern void (*vectab[])(void); /* locore.s functions */ void loadustp(int); void doboot(void) __attribute__((__noreturn__)); int nmihand(void *); extern int iscolor; #endif /* _KERNEL */ #define NEXT_RAMBASE (0x4000000) /* really depends on slot, but... */ #define NEXT_BANKSIZE (0x1000000) /* Size of a memory bank in physical address */ #if 0 /* @@@ this needs to be fixed to work on 030's */ #define NEXT_SLOT_ID 0x0 #ifdef M68030 #define NEXT_SLOT_ID_BMAP 0x0 #endif /* M68030 */ #endif #ifdef M68040 #ifdef DISABLE_NEXT_BMAP_CHIP /* @@@ For turbo testing */ #define NEXT_SLOT_ID_BMAP 0x0 #else #define NEXT_SLOT_ID_BMAP 0x00100000 #endif #define NEXT_SLOT_ID 0x0 #endif /* M68040 */ /****************************************************************/ /* Eventually, I'd like to move these defines off into * configure somewhere * Darrin B Jewell Thu Feb 5 03:50:58 1998 */ /* ROM */ #define NEXT_P_EPROM (NEXT_SLOT_ID+0x00000000) #define NEXT_P_EPROM_BMAP (NEXT_SLOT_ID+0x01000000) #define NEXT_P_EPROM_SIZE (128 * 1024) /* device space */ #define NEXT_P_DEV_SPACE (NEXT_SLOT_ID+0x02000000) #define NEXT_P_DEV_BMAP (NEXT_SLOT_ID+0x02100000) #define NEXT_DEV_SPACE_SIZE 0x0001c000 /* DMA control/status (writes MUST be 32-bit) */ #define NEXT_P_SCSI_CSR (NEXT_SLOT_ID+0x02000010) #define NEXT_P_SOUNDOUT_CSR (NEXT_SLOT_ID+0x02000040) #define NEXT_P_DISK_CSR (NEXT_SLOT_ID+0x02000050) #define NEXT_P_SOUNDIN_CSR (NEXT_SLOT_ID+0x02000080) #define NEXT_P_PRINTER_CSR (NEXT_SLOT_ID+0x02000090) #define NEXT_P_SCC_CSR (NEXT_SLOT_ID+0x020000c0) #define NEXT_P_DSP_CSR (NEXT_SLOT_ID+0x020000d0) #define NEXT_P_ENETX_CSR (NEXT_SLOT_ID+0x02000110) #define NEXT_P_ENETR_CSR (NEXT_SLOT_ID+0x02000150) #define NEXT_P_VIDEO_CSR (NEXT_SLOT_ID+0x02000180) #define NEXT_P_M2R_CSR (NEXT_SLOT_ID+0x020001d0) #define NEXT_P_R2M_CSR (NEXT_SLOT_ID+0x020001c0) /* DMA scratch pad (writes MUST be 32-bit) */ #define NEXT_P_VIDEO_SPAD (NEXT_SLOT_ID+0x02004180) #define NEXT_P_EVENT_SPAD (NEXT_SLOT_ID+0x0200418c) #define NEXT_P_M2M_SPAD (NEXT_SLOT_ID+0x020041e0) /* device registers */ #define NEXT_P_ENET (NEXT_SLOT_ID_BMAP+0x02006000) #define NEXT_P_DSP (NEXT_SLOT_ID_BMAP+0x02008000) #define NEXT_P_MON (NEXT_SLOT_ID+0x0200e000) #define NEXT_P_PRINTER (NEXT_SLOT_ID+0x0200f000) #define NEXT_P_DISK (NEXT_SLOT_ID_BMAP+0x02012000) #define NEXT_P_SCSI (NEXT_SLOT_ID_BMAP+0x02014000) #define NEXT_P_FLOPPY (NEXT_SLOT_ID_BMAP+0x02014100) #define NEXT_P_TIMER (NEXT_SLOT_ID_BMAP+0x02016000) #define NEXT_P_TIMER_CSR (NEXT_SLOT_ID_BMAP+0x02016004) #define NEXT_P_SCC (NEXT_SLOT_ID_BMAP+0x02018000) #define NEXT_P_SCC_CLK (NEXT_SLOT_ID_BMAP+0x02018004) #define NEXT_P_EVENTC (NEXT_SLOT_ID_BMAP+0x0201a000) #define NEXT_P_BMAP (NEXT_SLOT_ID+0x020c0000) /* All COLOR_FB registers are 1 byte wide */ #define NEXT_P_C16_DAC_0 (NEXT_SLOT_ID_BMAP+0x02018100) /* COLOR_FB - RAMDAC */ #define NEXT_P_C16_DAC_1 (NEXT_SLOT_ID_BMAP+0x02018101) #define NEXT_P_C16_DAC_2 (NEXT_SLOT_ID_BMAP+0x02018102) #define NEXT_P_C16_DAC_3 (NEXT_SLOT_ID_BMAP+0x02018103) #define NEXT_P_C16_CMD_REG (NEXT_SLOT_ID_BMAP+0x02018180) /* COLOR_FB - CSR */ /* system control registers */ #define NEXT_P_MEMTIMING (NEXT_SLOT_ID_BMAP+0x02006010) #define NEXT_P_INTRSTAT (NEXT_SLOT_ID+0x02007000) #define NEXT_P_INTRSTAT_CON 0x02007000 /* #define NEXT_P_INTRSTAT_0 (NEXT_SLOT_ID+0x02008000) */ #define NEXT_P_INTRMASK (NEXT_SLOT_ID+0x02007800) #define NEXT_P_INTRMASK_CON 0x02007800 /* #define NEXT_P_INTRMASK_0 (NEXT_SLOT_ID+0x0200a000) */ #define NEXT_P_SCR1 (NEXT_SLOT_ID+0x0200c000) #define NEXT_P_SCR1_CON 0x0200c000 #define NEXT_P_SID 0x0200c800 /* NOT slot-relative */ #define NEXT_P_SCR2 (NEXT_SLOT_ID+0x0200d000) #define NEXT_P_SCR2_CON 0x0200d000 #define NEXT_P_RMTINT (NEXT_SLOT_ID+0x0200d800) #define NEXT_P_BRIGHTNESS (NEXT_SLOT_ID_BMAP+0x02010000) #define NEXT_P_DRAM_TIMING (NEXT_SLOT_ID_BMAP+0x02018190) /* Warp 9C memory ctlr */ #define NEXT_P_VRAM_TIMING (NEXT_SLOT_ID_BMAP+0x02018198) /* Warp 9C memory ctlr */ /* memory */ #define NEXT_P_MAINMEM (NEXT_SLOT_ID+0x04000000) #define NEXT_P_MEMSIZE 0x04000000 #define NEXT_P_VIDEOMEM (NEXT_SLOT_ID+0x0b000000) #define NEXT_P_VIDEOSIZE 0x0003a800 #if 0 #define NEXT_P_C16_VIDEOMEM (NEXT_SLOT_ID+0x06000000) /* COLOR_FB */ #endif #define NEXT_P_C16_VIDEOMEM (0x2c000000) #define NEXT_P_C16_VIDEOSIZE 0x001D4000 /* COLOR_FB */ #define NEXT_P_WF4VIDEO (NEXT_SLOT_ID+0x0c000000) /* w A+B-AB function */ #define NEXT_P_WF3VIDEO (NEXT_SLOT_ID+0x0d000000) /* w (1-A)B function */ #define NEXT_P_WF2VIDEO (NEXT_SLOT_ID+0x0e000000) /* w ceil(A+B) function */ #define NEXT_P_WF1VIDEO (NEXT_SLOT_ID+0x0f000000) /* w AB function */ #define NEXT_P_WF4MEM (NEXT_SLOT_ID+0x10000000) /* w A+B-AB function */ #define NEXT_P_WF3MEM (NEXT_SLOT_ID+0x14000000) /* w (1-A)B function */ #define NEXT_P_WF2MEM (NEXT_SLOT_ID+0x18000000) /* w ceil(A+B) function */ #define NEXT_P_WF1MEM (NEXT_SLOT_ID+0x1c000000) /* w AB function */ #define NEXT_NMWF 4 /* # of memory write funcs */ /* * Interrupt structure. * BASE and BITS define the origin and length of the bit field in the * interrupt status/mask register for the particular interrupt level. * The first component of the interrupt device name indicates the bit * position in the interrupt status and mask registers; the second is the * interrupt level; the third is the bit index relative to the start of the * bit field. */ #define NEXT_I(l,i,b) (((b) << 8) | ((l) << 4) | (i)) #define NEXT_I_INDEX(i) ((i) & 0xf) #define NEXT_I_IPL(i) (((i) >> 4) & 7) #define NEXT_I_BIT(i) ( 1 << (((i) >> 8) & 0x1f)) #define NEXT_I_IPL7_BASE 0 #define NEXT_I_IPL7_BITS 2 #define NEXT_I_NMI NEXT_I(7,0,31) #define NEXT_I_PFAIL NEXT_I(7,1,30) #define NEXT_I_IPL6_BASE 2 #define NEXT_I_IPL6_BITS 12 #define NEXT_I_TIMER NEXT_I(6,0,29) #define NEXT_I_ENETX_DMA NEXT_I(6,1,28) #define NEXT_I_ENETR_DMA NEXT_I(6,2,27) #define NEXT_I_SCSI_DMA NEXT_I(6,3,26) #define NEXT_I_DISK_DMA NEXT_I(6,4,25) #define NEXT_I_PRINTER_DMA NEXT_I(6,5,24) #define NEXT_I_SOUND_OUT_DMA NEXT_I(6,6,23) #define NEXT_I_SOUND_IN_DMA NEXT_I(6,7,22) #define NEXT_I_SCC_DMA NEXT_I(6,8,21) #define NEXT_I_DSP_DMA NEXT_I(6,9,20) #define NEXT_I_M2R_DMA NEXT_I(6,10,19) #define NEXT_I_R2M_DMA NEXT_I(6,11,18) #define NEXT_I_IPL5_BASE 14 #define NEXT_I_IPL5_BITS 3 #define NEXT_I_SCC NEXT_I(5,0,17) #define NEXT_I_REMOTE NEXT_I(5,1,16) #define NEXT_I_BUS NEXT_I(5,2,15) #define NEXT_I_IPL4_BASE 17 #define NEXT_I_IPL4_BITS 1 #define NEXT_I_DSP_4 NEXT_I(4,0,14) #define NEXT_I_IPL3_BASE 18 #define NEXT_I_IPL3_BITS 12 #define NEXT_I_DISK NEXT_I(3,0,13) #define NEXT_I_C16_VIDEO NEXT_I(3,0,13) /* COLOR_FB - Steals old ESDI interrupt */ #define NEXT_I_SCSI NEXT_I(3,1,12) #define NEXT_I_PRINTER NEXT_I(3,2,11) #define NEXT_I_ENETX NEXT_I(3,3,10) #define NEXT_I_ENETR NEXT_I(3,4,9) #define NEXT_I_SOUND_OVRUN NEXT_I(3,5,8) #define NEXT_I_PHONE NEXT_I(3,6,7) #define NEXT_I_DSP_3 NEXT_I(3,7,6) #define NEXT_I_VIDEO NEXT_I(3,8,5) #define NEXT_I_MONITOR NEXT_I(3,9,4) #define NEXT_I_KYBD_MOUSE NEXT_I(3,10,3) #define NEXT_I_POWER NEXT_I(3,11,2) #define NEXT_I_IPL2_BASE 30 #define NEXT_I_IPL2_BITS 1 #define NEXT_I_SOFTINT1 NEXT_I(2,0,1) #define NEXT_I_IPL1_BASE 31 #define NEXT_I_IPL1_BITS 1 #define NEXT_I_SOFTINT0 NEXT_I(1,0,0) /****************************************************************/ /* physical memory sections */ #if 0 #define ROMBASE (0x00000000) #endif #define INTIOBASE (0x02000000) #define INTIOTOP (0x02120000) #define MONOBASE (0x0b000000) #define MONOTOP (0x0b03a800) #define COLORBASE (0x2c000000) #define COLORTOP (0x2c1d4000) #define TURBOFBBASE (0x0c000000) #define TURBOMONOTOP (0x0c03a800) #define TURBOCOLORTOP (0x0c1d4000) #define NEXT_INTR_BITS \ "\20\40NMI\37PFAIL\36TIMER\35ENETX_DMA\34ENETR_DMA\33SCSI_DMA\32DISK_DMA\31PRINTER_DMA\30SOUND_OUT_DMA\27SOUND_IN_DMA\26SCC_DMA\25DSP_DMA\24M2R_DMA\23R2M_DMA\22SCC\21REMOTE\20BUS\17DSP_4\16DISK|C16_VIDEO\15SCSI\14PRINTER\13ENETX\12ENETR\11SOUND_OVRUN\10PHONE\07DSP_3\06VIDEO\05MONITOR\04KYBD_MOUSE\03POWER\02SOFTINT1\01SOFTINT0" /* * Internal IO space: * * Ranges from 0x400000 to 0x600000 (IIOMAPSIZE). * * Internal IO space is mapped in the kernel from ``intiobase'' to * ``intiolimit'' (defined in locore.s). Since it is always mapped, * conversion between physical and kernel virtual addresses is easy. */ #define IIOV(pa) ((int)(pa)-INTIOBASE+intiobase) #define IIOP(va) ((int)(va)-intiobase+INTIOBASE) #define IIOMAPSIZE btoc(INTIOTOP-INTIOBASE) /* 2mb */ #endif /* _MACHINE_CPU_H_ */