# $NetBSD: GENERIC,v 1.54.6.2 2018/01/26 14:28:17 martin Exp $ # # GENERIC machine description file # # This machine description file is used to generate the default NetBSD # kernel. The generic kernel does not include all options, subsystems # and device drivers, but should be useful for most applications. # # The machine description file can be customised for your specific # machine to reduce the kernel size and improve its performance. # # For further information on compiling NetBSD kernels, see the config(8) # man page. # # For further information on hardware support for this architecture, see # the intro(4) man page. For further information about kernel options # for this architecture, see the options(4) man page. For an explanation # of each device driver in this file see the section 4 man page for the # device. include "arch/landisk/conf/std.landisk" options INCLUDE_CONFIG_FILE # embed config file in kernel binary #ident "GENERIC-$Revision: 1.54.6.2 $" maxusers 16 # estimated number of users makeoptions CPUFLAGS="-m4-nofpu" # XXX: move to std.landisk? #makeoptions COPTS="-Os -freorder-blocks" # -O2 is too -falign-* zealous # CPU-related options. options PCLOCK=33333333 # 33.33MHz options DONT_INIT_BSC #options DONT_INIT_PCIBSC # Cache options. options SH4_CACHE_DISABLE_EMODE #options SH4_CACHE_DISABLE_ICACHE #options SH4_CACHE_DISABLE_DCACHE #options SH4_CACHE_WB_U0_P0_P3 #options SH4_CACHE_WB_P1 # kloader-related #options KLOADER #options KLOADER_KERNEL_PATH="\"/netbsd\"" #options KLOADER_DEBUG # Standard system options options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT #options HZ=64 # clock interrupt generates every 1/HZ sec options NTP # NTP phase/frequency locked loop options KTRACE # system call tracing via ktrace(1) options SYSVMSG # System V-like message queues options SYSVSEM # System V-like semaphores options SYSVSHM # System V-like memory sharing #options MODULAR # new style module(7) framework #options MODULAR_DEFAULT_AUTOLOAD options USERCONF # userconf(4) support #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel # Alternate buffer queue strategies for better responsiveness under high # disk I/O load. #options BUFQ_READPRIO #options BUFQ_PRIOCSCAN # Diagnostic/debugging support options #options DIAGNOSTIC # cheap kernel consistency checks #options DEBUG # expensive debugging checks/support options DDB # in-kernel debugger #options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic' options DDB_HISTORY_SIZE=512 # Enable history editing in DDB #makeoptions DEBUG="-g -fno-omit-frame-pointer" # Compatibility options options COMPAT_16 # NetBSD 1.6, options COMPAT_20 # NetBSD 2.0, options COMPAT_30 # NetBSD 3.0, options COMPAT_40 # NetBSD 4.0, options COMPAT_50 # NetBSD 5.0, options COMPAT_60 # NetBSD 6.0, and options COMPAT_70 # NetBSD 7.0 binary compatibility. options COMPAT_43 # and 4.3BSD #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. # Executable format options options EXEC_COFF # COFF executables # File systems file-system FFS # UFS file-system EXT2FS # second extended file system (linux) file-system LFS # log-structured file system file-system MFS # memory file system file-system NFS # Network File System client file-system NTFS # Windows/NT file system (experimental) file-system CD9660 # ISO 9660 + Rock Ridge file system file-system MSDOSFS # MS-DOS file system file-system FDESC # /dev/fd file-system KERNFS # /kern file-system NULLFS # loopback file system file-system OVERLAY # overlay file system file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) file-system PROCFS # /proc file-system UMAPFS # NULLFS + uid and gid remapping file-system UNION # union file system file-system CODA # Coda File System; also needs vcoda (below) file-system SMBFS # experimental - CIFS; also needs nsmb (below) file-system PTYFS # /dev/pts/N support file-system TMPFS # Efficient memory file-system #file-system UDF # experimental - OSTA UDF CD/DVD file-system # File system options options QUOTA # legacy UFS quotas options QUOTA2 # new, in-filesystem UFS quotas #options DISKLABEL_EI # disklabel Endian Independent support #options FFS_EI # FFS Endian Independent support options WAPBL # File system journaling support #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental options NFSSERVER # Network File System server #options FFS_NO_SNAPSHOT # ffs snapshots options UFS_EXTATTR # Extended attribute support for UFS1 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and # immutable) behave as system flags. # Networking options #options GATEWAY # packet forwarding options INET # IP + ICMP + TCP + UDP options INET6 # IPV6 #options IPSEC # IP security #options IPSEC_DEBUG # debug for IP security #options MROUTING # IP multicast routing #options PIM # Protocol Independent Multicast #options NETATALK # AppleTalk networking protocols #options PPP_BSDCOMP # BSD-Compress compression support for PPP #options PPP_DEFLATE # Deflate compression support for PPP #options PPP_FILTER # Active filter support for PPP (requires bpf) #options IPFILTER_LOG # ipmon(8) log support options IPFILTER_COMPAT # Compat for IP-Filter #options IPFILTER_DEFAULT_BLOCK # block all packets by default #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG #options ALTQ # Manipulate network interfaces' output queues #options ALTQ_BLUE # Stochastic Fair Blue #options ALTQ_CBQ # Class-Based Queueing #options ALTQ_CDNR # Diffserv Traffic Conditioner #options ALTQ_FIFOQ # First-In First-Out Queue #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) #options ALTQ_HFSC # Hierarchical Fair Service Curve #options ALTQ_LOCALQ # Local queueing discipline #options ALTQ_PRIQ # Priority Queueing #options ALTQ_RED # Random Early Detection #options ALTQ_RIO # RED with IN/OUT #options ALTQ_WFQ # Weighted Fair Queueing # These options enable verbose messages for several subsystems. # Warning, these may compile large string tables into the kernel! options MIIVERBOSE # verbose PHY autoconfig messages options PCIVERBOSE # verbose PCI device autoconfig messages #options PCI_CONFIG_DUMP # verbosely dump PCI config space options SCSIVERBOSE # human readable SCSI error messages options USBVERBOSE # verbose USB device autoconfig messages options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM # Kernel root file system and dump configuration. #config netbsd root on ? type ? config netbsd root on wd0a type ffs #config netbsd root on ? type nfs # # Device configuration # mainbus0 at root cpu* at mainbus? # Basic Bus Support # PCI bus support options PCI_NETBSD_CONFIGURE shpcic* at mainbus? # SH7751 PCIC pci0 at shpcic? bus ? # SH bus shb* at mainbus? # ob-board I/O bus obio0 at mainbus? # Serial Devices options SCIFCONSOLE options SCIFCN_SPEED=9600 scif0 at shb? rs5c313rtc0 at shb0 # time-of-day clock # SCSI Controllers and Devices # SCSI devices sd* at scsibus? target ? lun ? # SCSI disk drives st* at scsibus? target ? lun ? # SCSI tape drives cd* at scsibus? target ? lun ? # SCSI CD-ROM drives ch* at scsibus? target ? lun ? # SCSI autochangers ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices ss* at scsibus? target ? lun ? # SCSI scanners uk* at scsibus? target ? lun ? # SCSI unknown # IDE and related devices # PCI IDE controllers - see pciide(4) for supported hardware. # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know # how to set up DMA modes for this chip. This may work, or may cause # a machine hang with some controllers. pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver acardide* at pci? dev ? function ? # Acard IDE controllers wdc0 at obio? port 0x14000000 irq 10 # CF #wdc1 at obio? port 0x18000000 irq 9 # iConnect # ATA (IDE) bus support atabus* at ata? # IDE drives # Flags are used only with controllers that support DMA operations # and mode settings (e.g. some pciide controllers) # The lowest order four bits (rightmost digit) of the flags define the PIO # mode to use, the next set of four bits the DMA mode and the third set the # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode # to use, and the last bit must be 1 for this setting to be used. # For DMA and UDMA, 0xf (1111) means 'disable'. # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. # (0xc=1100, 0xa=1010, 0xf=1111) # 0x0000 means "use whatever the drive claims to support". wd* at atabus? drive ? flags 0x0000 # ATAPI bus support atapibus* at atapi? # ATAPI devices # flags have the same meaning as for IDE drives. cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown # Network Interfaces # PCI network interfaces re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S rtk* at pci? dev ? function ? # Realtek 8129/8139 # MII/PHY support rlphy* at mii? phy ? # Realtek 8139/8201L PHYs urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs ukphy* at mii? phy ? # generic unknown PHYs # USB Controller and Devices # PCI USB controllers ehci* at pci? dev ? function ? # Enhanced Host Controller ohci* at pci? dev ? function ? # Open Host Controller # USB bus support usb* at ehci? usb* at ohci? # USB Hubs uhub* at usb? uhub* at uhub? port ? # USB HID device uhidev* at uhub? port ? configuration ? interface ? # USB Mice ums* at uhidev? reportid ? wsmouse* at ums? mux 0 # USB Keyboards ukbd* at uhidev? reportid ? wskbd* at ukbd? console ? mux 1 # USB LCDs and USB-VGA adaptors udl* at uhub? port ? # DisplayLink DL-1x0/1x5 wsdisplay* at udl? # USB serial adpater ucycom* at uhidev? reportid ? # USB Generic HID devices uhid* at uhidev? reportid ? # USB Printer ulpt* at uhub? port ? configuration ? interface ? # USB Modem umodem* at uhub? port ? configuration ? ucom* at umodem? # Option N.V. Wireless WAN modems uhso* at uhub? port ? configuration ? # USB Mass Storage umass* at uhub? port ? configuration ? interface ? scsibus* at umass? wd* at umass? # USB audio uaudio* at uhub? port ? configuration ? # USB MIDI umidi* at uhub? port ? configuration ? # USB IrDA # USB-IrDA bridge spec uirda* at uhub? port ? configuration ? interface ? irframe* at uirda? # SigmaTel STIr4200 USB/IrDA Bridge ustir* at uhub? port ? irframe* at ustir? # USB Ethernet adapters aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters axe* at uhub? port ? # ASIX AX88172 based adapters cdce* at uhub? port ? # CDC, Ethernet Networking Control Model cue* at uhub? port ? # CATC USB-EL1201A based adapters kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters udav* at uhub? port ? # Davicom DM9601 based adapters ural* at uhub? port ? # Ralink Technology RT2500USB 802.11a/b/g url* at uhub? port ? # Realtek RTL8150L based adapters # USB 802.11b adapters atu* at uhub? port ? # Atmel AT76C50XX based adapters # Prolific PL2301/PL2302 host-to-host adapter upl* at uhub? port ? # Serial adapters ubsa* at uhub? port ? # Belkin serial adapter ucom* at ubsa? portno ? uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter ucom* at uftdi? portno ? umct* at uhub? port ? # MCT USB-RS232 serial adapter ucom* at umct? portno ? uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter ucom* at uplcom? portno ? uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter ucom* at uvscom? portno ? # Diamond Multimedia Rio 500 urio* at uhub? port ? # USB Handspring Visor uvisor* at uhub? port ? ucom* at uvisor? # Kyocera AIR-EDGE PHONE ukyopon* at uhub? port ? ucom* at ukyopon? portno ? # USB scanners #uscanner* at uhub? port ? # USB scanners that use SCSI emulation, e.g., HP5300 usscanner* at uhub? port ? # Y@P firmware loader uyap* at uhub? port ? # D-Link DSB-R100 USB radio udsbr* at uhub? port ? radio* at udsbr? # USB Generic driver ugen* at uhub? port ? # Audio Devices # Audio support audio* at audiobus? spkr* at audio? # PC speaker (synthesized) # MIDI support midi* at midibus? # Miscellaneous Devices # Power switch pwrsw0 at obio? # Reset button, USL-5P misc button btn0 at obio? # Pull in optional local configuration cinclude "arch/landisk/conf/GENERIC.local" # Pseudo-Devices # # accept filters pseudo-device accf_data # "dataready" accept filter pseudo-device accf_http # "httpready" accept filter # disk/mass storage pseudo-devices pseudo-device ccd # concatenated/striped disk devices #pseudo-device cgd # cryptographic disk devices pseudo-device raid # RAIDframe disk driver options RAID_AUTOCONFIG # auto-configuration of RAID components # Options to enable various other RAIDframe RAID types. #options RF_INCLUDE_EVENODD=1 #options RF_INCLUDE_RAID5_RS=1 #options RF_INCLUDE_PARITYLOGGING=1 #options RF_INCLUDE_CHAINDECLUSTER=1 #options RF_INCLUDE_INTERDECLUSTER=1 #options RF_INCLUDE_PARITY_DECLUSTERING=1 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 pseudo-device fss # file system snapshot device pseudo-device md # memory disk device (ramdisk) pseudo-device vnd # disk-like interface to files options VND_COMPRESSION # compressed vnd(4) # network pseudo-devices pseudo-device bpfilter # Berkeley packet filter pseudo-device ipfilter # IP filter (firewall) and NAT pseudo-device loop # network loopback pseudo-device ppp # Point-to-Point Protocol pseudo-device pppoe # PPP over Ethernet (RFC 2516) pseudo-device sl # Serial Line IP pseudo-device strip # Starmode Radio IP (Metricom) pseudo-device irframetty # IrDA frame line discipline pseudo-device tap # virtual Ethernet pseudo-device tun # network tunneling over tty pseudo-device gre # generic L3 over IP tunnel pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) #pseudo-device faith # IPv[46] tcp relay translation i/f #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation pseudo-device vlan # IEEE 802.1q encapsulation pseudo-device bridge # simple inter-network bridging #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too pseudo-device agr # IEEE 802.3ad link aggregation #pseudo-device pf # PF packet filter #pseudo-device pflog # PF log if # miscellaneous pseudo-devices pseudo-device pty # pseudo-terminals pseudo-device sequencer # MIDI sequencer pseudo-device clockctl # user control of clock subsystem pseudo-device drvctl # user control of drive subsystem pseudo-device ksyms # /dev/ksyms pseudo-device putter # for puffs and pud # a pseudo device needed for Coda # also needs CODA (above) pseudo-device vcoda # coda minicache <-> venus comm. # a pseudo device needed for SMBFS pseudo-device nsmb # experimental - SMB requester # wscons pseudo-devices pseudo-device wsmux # mouse & keyboard multiplexor #pseudo-device wsfont options FILEASSOC # fileassoc(9) - required for Veriexec # and PAX_SEGVGUARD # Veriexec pseudo-device veriexec # # Uncomment the fingerprint methods below that are desired. Note that # removing fingerprint methods will have almost no impact on the kernel # code size. # options VERIFIED_EXEC_FP_RMD160 options VERIFIED_EXEC_FP_SHA256 options VERIFIED_EXEC_FP_SHA384 options VERIFIED_EXEC_FP_SHA512 options VERIFIED_EXEC_FP_SHA1 options VERIFIED_EXEC_FP_MD5 #options PAX_ASLR_DEBUG=1 # PaX ASLR debug options PAX_SEGVGUARD=0 # PaX Segmentation fault guard options PAX_MPROTECT=1 # PaX mprotect(2) restrictions #options PAX_MPROTECT_DEBUG=1 # PaX mprotect debug options PAX_ASLR=1 # PaX Address Space Layout Randomization