/* tc-msp430.c -- Assembler code for the Texas Instruments MSP430 Copyright (C) 2002-2016 Free Software Foundation, Inc. Contributed by Dmitry Diky This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GAS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GAS; see the file COPYING. If not, write to the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ #include "as.h" #include #include "subsegs.h" #include "opcode/msp430.h" #include "safe-ctype.h" #include "dwarf2dbg.h" #include "elf/msp430.h" #include "libiberty.h" /* We will disable polymorphs by default because it is dangerous. The potential problem here is the following: assume we got the following code: jump .l1 nop jump subroutine ; external symbol .l1: nop ret In case of assembly time relaxation we'll get: 0: jmp .l1 <.text +0x08> (reloc deleted) 2: nop 4: br subroutine .l1: 8: nop 10: ret If the 'subroutine' is within +-1024 bytes range then linker will produce: 0: jmp .text +0x08 2: nop 4: jmp subroutine .l1: 6: nop 8: ret ; 'jmp .text +0x08' will land here. WRONG!!! The workaround is the following: 1. Declare global var enable_polymorphs which set to 1 via option -mp. 2. Declare global var enable_relax which set to 1 via option -mQ. If polymorphs are enabled, and relax isn't, treat all jumps as long jumps, do not delete any relocs and leave them for linker. If relax is enabled, relax at assembly time and kill relocs as necessary. */ int msp430_enable_relax; int msp430_enable_polys; /* GCC uses the some condition codes which we'll implement as new polymorph instructions. COND EXPL SHORT JUMP LONG JUMP =============================================== eq == jeq jne +4; br lab ne != jne jeq +4; br lab ltn honours no-overflow flag ltn < jn jn +2; jmp +4; br lab lt < jl jge +4; br lab ltu < jlo lhs +4; br lab le <= see below leu <= see below gt > see below gtu > see below ge >= jge jl +4; br lab geu >= jhs jlo +4; br lab =============================================== Therefore, new opcodes are (BranchEQ -> beq; and so on...) beq,bne,blt,bltn,bltu,bge,bgeu 'u' means unsigned compares Also, we add 'jump' instruction: jump UNCOND -> jmp br lab They will have fmt == 4, and insn_opnumb == number of instruction. */ struct rcodes_s { const char * name; int index; /* Corresponding insn_opnumb. */ int sop; /* Opcode if jump length is short. */ long lpos; /* Label position. */ long lop0; /* Opcode 1 _word_ (16 bits). */ long lop1; /* Opcode second word. */ long lop2; /* Opcode third word. */ }; #define MSP430_RLC(n,i,sop,o1) \ {#n, i, sop, 2, (o1 + 2), 0x4010, 0} static struct rcodes_s msp430_rcodes[] = { MSP430_RLC (beq, 0, 0x2400, 0x2000), MSP430_RLC (bne, 1, 0x2000, 0x2400), MSP430_RLC (blt, 2, 0x3800, 0x3400), MSP430_RLC (bltu, 3, 0x2800, 0x2c00), MSP430_RLC (bge, 4, 0x3400, 0x3800), MSP430_RLC (bgeu, 5, 0x2c00, 0x2800), {"bltn", 6, 0x3000, 3, 0x3000 + 1, 0x3c00 + 2,0x4010}, {"jump", 7, 0x3c00, 1, 0x4010, 0, 0}, {0,0,0,0,0,0,0} }; #undef MSP430_RLC #define MSP430_RLC(n,i,sop,o1) \ {#n, i, sop, 2, (o1 + 2), 0x0030, 0} static struct rcodes_s msp430x_rcodes[] = { MSP430_RLC (beq, 0, 0x2400, 0x2000), MSP430_RLC (bne, 1, 0x2000, 0x2400), MSP430_RLC (blt, 2, 0x3800, 0x3400), MSP430_RLC (bltu, 3, 0x2800, 0x2c00), MSP430_RLC (bge, 4, 0x3400, 0x3800), MSP430_RLC (bgeu, 5, 0x2c00, 0x2800), {"bltn", 6, 0x3000, 3, 0x0030 + 1, 0x3c00 + 2, 0x3000}, {"jump", 7, 0x3c00, 1, 0x0030, 0, 0}, {0,0,0,0,0,0,0} }; #undef MSP430_RLC /* More difficult than above and they have format 5. COND EXPL SHORT LONG ================================================================= gt > jeq +2; jge label jeq +6; jl +4; br label gtu > jeq +2; jhs label jeq +6; jlo +4; br label leu <= jeq label; jlo label jeq +2; jhs +4; br label le <= jeq label; jl label jeq +2; jge +4; br label ================================================================= */ struct hcodes_s { const char * name; int index; /* Corresponding insn_opnumb. */ int tlab; /* Number of labels in short mode. */ int op0; /* Opcode for first word of short jump. */ int op1; /* Opcode for second word of short jump. */ int lop0; /* Opcodes for long jump mode. */ int lop1; int lop2; }; static struct hcodes_s msp430_hcodes[] = { {"bgt", 0, 1, 0x2401, 0x3400, 0x2403, 0x3802, 0x4010 }, {"bgtu", 1, 1, 0x2401, 0x2c00, 0x2403, 0x2802, 0x4010 }, {"bleu", 2, 2, 0x2400, 0x2800, 0x2401, 0x2c02, 0x4010 }, {"ble", 3, 2, 0x2400, 0x3800, 0x2401, 0x3402, 0x4010 }, {0,0,0,0,0,0,0,0} }; static struct hcodes_s msp430x_hcodes[] = { {"bgt", 0, 1, 0x2401, 0x3400, 0x2403, 0x3802, 0x0030 }, {"bgtu", 1, 1, 0x2401, 0x2c00, 0x2403, 0x2802, 0x0030 }, {"bleu", 2, 2, 0x2400, 0x2800, 0x2401, 0x2c02, 0x0030 }, {"ble", 3, 2, 0x2400, 0x3800, 0x2401, 0x3402, 0x0030 }, {0,0,0,0,0,0,0,0} }; const char comment_chars[] = ";"; const char line_comment_chars[] = "#"; const char line_separator_chars[] = "{"; const char EXP_CHARS[] = "eE"; const char FLT_CHARS[] = "dD"; /* Handle long expressions. */ extern LITTLENUM_TYPE generic_bignum[]; static struct hash_control *msp430_hash; /* Relaxations. */ #define STATE_UNCOND_BRANCH 1 /* jump */ #define STATE_NOOV_BRANCH 3 /* bltn */ #define STATE_SIMPLE_BRANCH 2 /* bne, beq, etc... */ #define STATE_EMUL_BRANCH 4 #define CNRL 2 #define CUBL 4 #define CNOL 8 #define CSBL 6 #define CEBL 4 /* Length. */ #define STATE_BITS10 1 /* wild guess. short jump */ #define STATE_WORD 2 /* 2 bytes pc rel. addr. more */ #define STATE_UNDEF 3 /* cannot handle this yet. convert to word mode */ #define ENCODE_RELAX(what,length) (((what) << 2) + (length)) #define RELAX_STATE(s) ((s) & 3) #define RELAX_LEN(s) ((s) >> 2) #define RELAX_NEXT(a,b) ENCODE_RELAX (a, b + 1) relax_typeS md_relax_table[] = { /* Unused. */ {1, 1, 0, 0}, {1, 1, 0, 0}, {1, 1, 0, 0}, {1, 1, 0, 0}, /* Unconditional jump. */ {1, 1, 8, 5}, {1024, -1024, CNRL, RELAX_NEXT (STATE_UNCOND_BRANCH, STATE_BITS10)}, /* state 10 bits displ */ {0, 0, CUBL, RELAX_NEXT (STATE_UNCOND_BRANCH, STATE_WORD)}, /* state word */ {1, 1, CUBL, 0}, /* state undef */ /* Simple branches. */ {0, 0, 8, 9}, {1024, -1024, CNRL, RELAX_NEXT (STATE_SIMPLE_BRANCH, STATE_BITS10)}, /* state 10 bits displ */ {0, 0, CSBL, RELAX_NEXT (STATE_SIMPLE_BRANCH, STATE_WORD)}, /* state word */ {1, 1, CSBL, 0}, /* blt no overflow branch. */ {1, 1, 8, 13}, {1024, -1024, CNRL, RELAX_NEXT (STATE_NOOV_BRANCH, STATE_BITS10)}, /* state 10 bits displ */ {0, 0, CNOL, RELAX_NEXT (STATE_NOOV_BRANCH, STATE_WORD)}, /* state word */ {1, 1, CNOL, 0}, /* Emulated branches. */ {1, 1, 8, 17}, {1020, -1020, CEBL, RELAX_NEXT (STATE_EMUL_BRANCH, STATE_BITS10)}, /* state 10 bits displ */ {0, 0, CNOL, RELAX_NEXT (STATE_EMUL_BRANCH, STATE_WORD)}, /* state word */ {1, 1, CNOL, 0} }; #define MAX_OP_LEN 4096 typedef enum msp_isa { MSP_ISA_430, MSP_ISA_430X, MSP_ISA_430Xv2 } msp_isa; static enum msp_isa selected_isa = MSP_ISA_430Xv2; static inline bfd_boolean target_is_430x (void) { return selected_isa >= MSP_ISA_430X; } static inline bfd_boolean target_is_430xv2 (void) { return selected_isa == MSP_ISA_430Xv2; } /* Generate an absolute 16-bit relocation. For the 430X we generate a relocation without linker range checking if the value is being used in an extended (ie 20-bit) instruction, otherwise if have a shifted expression we use a HI reloc. For the 430 we generate a relocation without assembler range checking if we are handling an immediate value or a byte-width instruction. */ #undef CHECK_RELOC_MSP430 #define CHECK_RELOC_MSP430(OP) \ (target_is_430x () \ ? (extended_op \ ? BFD_RELOC_16 \ : ((OP).vshift == 1) \ ? BFD_RELOC_MSP430_ABS_HI16 \ : BFD_RELOC_MSP430X_ABS16) \ : ((imm_op || byte_op) \ ? BFD_RELOC_MSP430_16_BYTE : BFD_RELOC_MSP430_16)) /* Generate a 16-bit pc-relative relocation. For the 430X we generate a relocation without linkwer range checking. For the 430 we generate a relocation without assembler range checking if we are handling an immediate value or a byte-width instruction. */ #undef CHECK_RELOC_MSP430_PCREL #define CHECK_RELOC_MSP430_PCREL \ (target_is_430x () \ ? BFD_RELOC_MSP430X_PCR16 \ : (imm_op || byte_op) \ ? BFD_RELOC_MSP430_16_PCREL_BYTE : BFD_RELOC_MSP430_16_PCREL) /* Profiling capability: It is a performance hit to use gcc's profiling approach for this tiny target. Even more -- jtag hardware facility does not perform any profiling functions. However we've got gdb's built-in simulator where we can do anything. Therefore my suggestion is: We define new section ".profiler" which holds all profiling information. We define new pseudo operation .profiler which will instruct assembler to add new profile entry to the object file. Profile should take place at the present address. Pseudo-op format: .profiler flags,function_to_profile [, cycle_corrector, extra] where 'flags' is a combination of the following chars: s - function Start x - function eXit i - function is in Init section f - function is in Fini section l - Library call c - libC standard call d - stack value Demand (saved at run-time in simulator) I - Interrupt service routine P - Prologue start p - Prologue end E - Epilogue start e - Epilogue end j - long Jump/ sjlj unwind a - an Arbitrary code fragment t - exTra parameter saved (constant value like frame size) '""' optional: "sil" == sil function_to_profile - function's address cycle_corrector - a value which should be added to the cycle counter, zero if omitted extra - some extra parameter, zero if omitted. For example: ------------------------------ .global fxx .type fxx,@function fxx: .LFrameOffset_fxx=0x08 .profiler "scdP", fxx ; function entry. ; we also demand stack value to be displayed push r11 push r10 push r9 push r8 .profiler "cdp",fxx,0, .LFrameOffset_fxx ; check stack value at this point ; (this is a prologue end) ; note, that spare var filled with the frame size mov r15,r8 .... .profiler cdE,fxx ; check stack pop r8 pop r9 pop r10 pop r11 .profiler xcde,fxx,3 ; exit adds 3 to the cycle counter ret ; cause 'ret' insn takes 3 cycles ------------------------------- This profiling approach does not produce any overhead and absolutely harmless. So, even profiled code can be uploaded to the MCU. */ #define MSP430_PROFILER_FLAG_ENTRY 1 /* s */ #define MSP430_PROFILER_FLAG_EXIT 2 /* x */ #define MSP430_PROFILER_FLAG_INITSECT 4 /* i */ #define MSP430_PROFILER_FLAG_FINISECT 8 /* f */ #define MSP430_PROFILER_FLAG_LIBCALL 0x10 /* l */ #define MSP430_PROFILER_FLAG_STDCALL 0x20 /* c */ #define MSP430_PROFILER_FLAG_STACKDMD 0x40 /* d */ #define MSP430_PROFILER_FLAG_ISR 0x80 /* I */ #define MSP430_PROFILER_FLAG_PROLSTART 0x100 /* P */ #define MSP430_PROFILER_FLAG_PROLEND 0x200 /* p */ #define MSP430_PROFILER_FLAG_EPISTART 0x400 /* E */ #define MSP430_PROFILER_FLAG_EPIEND 0x800 /* e */ #define MSP430_PROFILER_FLAG_JUMP 0x1000 /* j */ #define MSP430_PROFILER_FLAG_FRAGMENT 0x2000 /* a */ #define MSP430_PROFILER_FLAG_EXTRA 0x4000 /* t */ #define MSP430_PROFILER_FLAG_notyet 0x8000 /* ? */ static int pow2value (int y) { int n = 0; unsigned int x; x = y; if (!x) return 1; for (; x; x = x >> 1) if (x & 1) n++; return n == 1; } /* Parse ordinary expression. */ static char * parse_exp (char * s, expressionS * op) { input_line_pointer = s; expression (op); if (op->X_op == O_absent) as_bad (_("missing operand")); return input_line_pointer; } /* Delete spaces from s: X ( r 1 2) => X(r12). */ static void del_spaces (char * s) { while (*s) { if (ISSPACE (*s)) { char *m = s + 1; while (ISSPACE (*m) && *m) m++; memmove (s, m, strlen (m) + 1); } else s++; } } static inline char * skip_space (char * s) { while (ISSPACE (*s)) ++s; return s; } /* Extract one word from FROM and copy it to TO. Delimiters are ",;\n" */ static char * extract_operand (char * from, char * to, int limit) { int size = 0; /* Drop leading whitespace. */ from = skip_space (from); while (size < limit && *from) { *(to + size) = *from; if (*from == ',' || *from == ';' || *from == '\n') break; from++; size++; } *(to + size) = 0; del_spaces (to); from++; return from; } static void msp430_profiler (int dummy ATTRIBUTE_UNUSED) { char buffer[1024]; char f[32]; char * str = buffer; char * flags = f; int p_flags = 0; char * halt; int ops = 0; int left; char * s; segT seg; int subseg; char * end = 0; expressionS exp; expressionS exp1; s = input_line_pointer; end = input_line_pointer; while (*end && *end != '\n') end++; while (*s && *s != '\n') { if (*s == ',') ops++; s++; } left = 3 - ops; if (ops < 1) { as_bad (_(".profiler pseudo requires at least two operands.")); input_line_pointer = end; return; } input_line_pointer = extract_operand (input_line_pointer, flags, 32); while (*flags) { switch (*flags) { case '"': break; case 'a': p_flags |= MSP430_PROFILER_FLAG_FRAGMENT; break; case 'j': p_flags |= MSP430_PROFILER_FLAG_JUMP; break; case 'P': p_flags |= MSP430_PROFILER_FLAG_PROLSTART; break; case 'p': p_flags |= MSP430_PROFILER_FLAG_PROLEND; break; case 'E': p_flags |= MSP430_PROFILER_FLAG_EPISTART; break; case 'e': p_flags |= MSP430_PROFILER_FLAG_EPIEND; break; case 's': p_flags |= MSP430_PROFILER_FLAG_ENTRY; break; case 'x': p_flags |= MSP430_PROFILER_FLAG_EXIT; break; case 'i': p_flags |= MSP430_PROFILER_FLAG_INITSECT; break; case 'f': p_flags |= MSP430_PROFILER_FLAG_FINISECT; break; case 'l': p_flags |= MSP430_PROFILER_FLAG_LIBCALL; break; case 'c': p_flags |= MSP430_PROFILER_FLAG_STDCALL; break; case 'd': p_flags |= MSP430_PROFILER_FLAG_STACKDMD; break; case 'I': p_flags |= MSP430_PROFILER_FLAG_ISR; break; case 't': p_flags |= MSP430_PROFILER_FLAG_EXTRA; break; default: as_warn (_("unknown profiling flag - ignored.")); break; } flags++; } if (p_flags && ( ! pow2value (p_flags & ( MSP430_PROFILER_FLAG_ENTRY | MSP430_PROFILER_FLAG_EXIT)) || ! pow2value (p_flags & ( MSP430_PROFILER_FLAG_PROLSTART | MSP430_PROFILER_FLAG_PROLEND | MSP430_PROFILER_FLAG_EPISTART | MSP430_PROFILER_FLAG_EPIEND)) || ! pow2value (p_flags & ( MSP430_PROFILER_FLAG_INITSECT | MSP430_PROFILER_FLAG_FINISECT)))) { as_bad (_("ambiguous flags combination - '.profiler' directive ignored.")); input_line_pointer = end; return; } /* Generate temp symbol which denotes current location. */ if (now_seg == absolute_section) /* Paranoia ? */ { exp1.X_op = O_constant; exp1.X_add_number = abs_section_offset; as_warn (_("profiling in absolute section?")); } else { exp1.X_op = O_symbol; exp1.X_add_symbol = symbol_temp_new_now (); exp1.X_add_number = 0; } /* Generate a symbol which holds flags value. */ exp.X_op = O_constant; exp.X_add_number = p_flags; /* Save current section. */ seg = now_seg; subseg = now_subseg; /* Now go to .profiler section. */ obj_elf_change_section (".profiler", SHT_PROGBITS, 0, 0, 0, 0, 0); /* Save flags. */ emit_expr (& exp, 2); /* Save label value. */ emit_expr (& exp1, 2); while (ops--) { /* Now get profiling info. */ halt = extract_operand (input_line_pointer, str, 1024); /* Process like ".word xxx" directive. */ parse_exp (str, & exp); emit_expr (& exp, 2); input_line_pointer = halt; } /* Fill the rest with zeros. */ exp.X_op = O_constant; exp.X_add_number = 0; while (left--) emit_expr (& exp, 2); /* Return to current section. */ subseg_set (seg, subseg); } static char * extract_word (char * from, char * to, int limit) { char *op_end; int size = 0; /* Drop leading whitespace. */ from = skip_space (from); *to = 0; /* Find the op code end. */ for (op_end = from; *op_end != 0 && is_part_of_name (*op_end);) { to[size++] = *op_end++; if (size + 1 >= limit) break; } to[size] = 0; return op_end; } #define OPTION_MMCU 'm' #define OPTION_RELAX 'Q' #define OPTION_POLYMORPHS 'P' #define OPTION_LARGE 'l' static bfd_boolean large_model = FALSE; #define OPTION_NO_INTR_NOPS 'N' #define OPTION_INTR_NOPS 'n' static bfd_boolean gen_interrupt_nops = FALSE; #define OPTION_WARN_INTR_NOPS 'y' #define OPTION_NO_WARN_INTR_NOPS 'Y' static bfd_boolean warn_interrupt_nops = TRUE; #define OPTION_MCPU 'c' #define OPTION_MOVE_DATA 'd' static bfd_boolean move_data = FALSE; enum { OPTION_SILICON_ERRATA = OPTION_MD_BASE, OPTION_SILICON_ERRATA_WARN, }; static unsigned int silicon_errata_fix = 0; static unsigned int silicon_errata_warn = 0; #define SILICON_ERRATA_CPU4 (1 << 0) #define SILICON_ERRATA_CPU8 (1 << 1) #define SILICON_ERRATA_CPU11 (1 << 2) #define SILICON_ERRATA_CPU12 (1 << 3) #define SILICON_ERRATA_CPU13 (1 << 4) #define SILICON_ERRATA_CPU19 (1 << 5) static void msp430_set_arch (int option) { char str[32]; /* 32 for good measure. */ input_line_pointer = extract_word (input_line_pointer, str, 32); md_parse_option (option, str); bfd_set_arch_mach (stdoutput, TARGET_ARCH, target_is_430x () ? bfd_mach_msp430x : bfd_mach_msp11); } /* This is a copy of the same data structure found in gcc/config/msp430/msp430.c Keep these two structures in sync. The data in this structure has been extracted from the devices.csv file released by TI, updated as of March 2016. */ struct msp430_mcu_data { const char * name; unsigned int revision; /* 0=> MSP430, 1=>MSP430X, 2=> MSP430Xv2. */ unsigned int hwmpy; /* 0=>none, 1=>16-bit, 2=>16-bit w/sign extend, 4=>32-bit, 8=> 32-bit (5xx). */ } msp430_mcu_data [] = { { "cc430f5123",2,8 }, { "cc430f5125",2,8 }, { "cc430f5133",2,8 }, { "cc430f5135",2,8 }, { "cc430f5137",2,8 }, { "cc430f5143",2,8 }, { "cc430f5145",2,8 }, { "cc430f5147",2,8 }, { "cc430f6125",2,8 }, { "cc430f6126",2,8 }, { "cc430f6127",2,8 }, { "cc430f6135",2,8 }, { "cc430f6137",2,8 }, { "cc430f6143",2,8 }, { "cc430f6145",2,8 }, { "cc430f6147",2,8 }, { "msp430afe221",0,2 }, { "msp430afe222",0,2 }, { "msp430afe223",0,2 }, { "msp430afe231",0,2 }, { "msp430afe232",0,2 }, { "msp430afe233",0,2 }, { "msp430afe251",0,2 }, { "msp430afe252",0,2 }, { "msp430afe253",0,2 }, { "msp430bt5190",2,8 }, { "msp430c091",0,0 }, { "msp430c092",0,0 }, { "msp430c111",0,0 }, { "msp430c1111",0,0 }, { "msp430c112",0,0 }, { "msp430c1121",0,0 }, { "msp430c1331",0,0 }, { "msp430c1351",0,0 }, { "msp430c311s",0,0 }, { "msp430c312",0,0 }, { "msp430c313",0,0 }, { "msp430c314",0,0 }, { "msp430c315",0,0 }, { "msp430c323",0,0 }, { "msp430c325",0,0 }, { "msp430c336",0,1 }, { "msp430c337",0,1 }, { "msp430c412",0,0 }, { "msp430c413",0,0 }, { "msp430cg4616",1,1 }, { "msp430cg4617",1,1 }, { "msp430cg4618",1,1 }, { "msp430cg4619",1,1 }, { "msp430e112",0,0 }, { "msp430e313",0,0 }, { "msp430e315",0,0 }, { "msp430e325",0,0 }, { "msp430e337",0,1 }, { "msp430f110",0,0 }, { "msp430f1101",0,0 }, { "msp430f1101a",0,0 }, { "msp430f1111",0,0 }, { "msp430f1111a",0,0 }, { "msp430f112",0,0 }, { "msp430f1121",0,0 }, { "msp430f1121a",0,0 }, { "msp430f1122",0,0 }, { "msp430f1132",0,0 }, { "msp430f122",0,0 }, { "msp430f1222",0,0 }, { "msp430f123",0,0 }, { "msp430f1232",0,0 }, { "msp430f133",0,0 }, { "msp430f135",0,0 }, { "msp430f147",0,1 }, { "msp430f1471",0,1 }, { "msp430f148",0,1 }, { "msp430f1481",0,1 }, { "msp430f149",0,1 }, { "msp430f1491",0,1 }, { "msp430f155",0,0 }, { "msp430f156",0,0 }, { "msp430f157",0,0 }, { "msp430f1610",0,1 }, { "msp430f1611",0,1 }, { "msp430f1612",0,1 }, { "msp430f167",0,1 }, { "msp430f168",0,1 }, { "msp430f169",0,1 }, { "msp430f2001",0,0 }, { "msp430f2002",0,0 }, { "msp430f2003",0,0 }, { "msp430f2011",0,0 }, { "msp430f2012",0,0 }, { "msp430f2013",0,0 }, { "msp430f2101",0,0 }, { "msp430f2111",0,0 }, { "msp430f2112",0,0 }, { "msp430f2121",0,0 }, { "msp430f2122",0,0 }, { "msp430f2131",0,0 }, { "msp430f2132",0,0 }, { "msp430f2232",0,0 }, { "msp430f2234",0,0 }, { "msp430f2252",0,0 }, { "msp430f2254",0,0 }, { "msp430f2272",0,0 }, { "msp430f2274",0,0 }, { "msp430f233",0,2 }, { "msp430f2330",0,2 }, { "msp430f235",0,2 }, { "msp430f2350",0,2 }, { "msp430f2370",0,2 }, { "msp430f2410",0,2 }, { "msp430f2416",1,2 }, { "msp430f2417",1,2 }, { "msp430f2418",1,2 }, { "msp430f2419",1,2 }, { "msp430f247",0,2 }, { "msp430f2471",0,2 }, { "msp430f248",0,2 }, { "msp430f2481",0,2 }, { "msp430f249",0,2 }, { "msp430f2491",0,2 }, { "msp430f2616",1,2 }, { "msp430f2617",1,2 }, { "msp430f2618",1,2 }, { "msp430f2619",1,2 }, { "msp430f412",0,0 }, { "msp430f413",0,0 }, { "msp430f4132",0,0 }, { "msp430f415",0,0 }, { "msp430f4152",0,0 }, { "msp430f417",0,0 }, { "msp430f423",0,1 }, { "msp430f423a",0,1 }, { "msp430f425",0,1 }, { "msp430f4250",0,0 }, { "msp430f425a",0,1 }, { "msp430f4260",0,0 }, { "msp430f427",0,1 }, { "msp430f4270",0,0 }, { "msp430f427a",0,1 }, { "msp430f435",0,0 }, { "msp430f4351",0,0 }, { "msp430f436",0,0 }, { "msp430f4361",0,0 }, { "msp430f437",0,0 }, { "msp430f4371",0,0 }, { "msp430f438",0,0 }, { "msp430f439",0,0 }, { "msp430f447",0,1 }, { "msp430f448",0,1 }, { "msp430f4481",0,1 }, { "msp430f449",0,1 }, { "msp430f4491",0,1 }, { "msp430f4616",1,1 }, { "msp430f46161",1,1 }, { "msp430f4617",1,1 }, { "msp430f46171",1,1 }, { "msp430f4618",1,1 }, { "msp430f46181",1,1 }, { "msp430f4619",1,1 }, { "msp430f46191",1,1 }, { "msp430f47126",1,4 }, { "msp430f47127",1,4 }, { "msp430f47163",1,4 }, { "msp430f47166",1,4 }, { "msp430f47167",1,4 }, { "msp430f47173",1,4 }, { "msp430f47176",1,4 }, { "msp430f47177",1,4 }, { "msp430f47183",1,4 }, { "msp430f47186",1,4 }, { "msp430f47187",1,4 }, { "msp430f47193",1,4 }, { "msp430f47196",1,4 }, { "msp430f47197",1,4 }, { "msp430f477",0,0 }, { "msp430f478",0,0 }, { "msp430f4783",0,4 }, { "msp430f4784",0,4 }, { "msp430f479",0,0 }, { "msp430f4793",0,4 }, { "msp430f4794",0,4 }, { "msp430f5131",2,8 }, { "msp430f5132",2,8 }, { "msp430f5151",2,8 }, { "msp430f5152",2,8 }, { "msp430f5171",2,8 }, { "msp430f5172",2,8 }, { "msp430f5212",2,8 }, { "msp430f5213",2,8 }, { "msp430f5214",2,8 }, { "msp430f5217",2,8 }, { "msp430f5218",2,8 }, { "msp430f5219",2,8 }, { "msp430f5222",2,8 }, { "msp430f5223",2,8 }, { "msp430f5224",2,8 }, { "msp430f5227",2,8 }, { "msp430f5228",2,8 }, { "msp430f5229",2,8 }, { "msp430f5232",2,8 }, { "msp430f5234",2,8 }, { "msp430f5237",2,8 }, { "msp430f5239",2,8 }, { "msp430f5242",2,8 }, { "msp430f5244",2,8 }, { "msp430f5247",2,8 }, { "msp430f5249",2,8 }, { "msp430f5252",2,8 }, { "msp430f5253",2,8 }, { "msp430f5254",2,8 }, { "msp430f5255",2,8 }, { "msp430f5256",2,8 }, { "msp430f5257",2,8 }, { "msp430f5258",2,8 }, { "msp430f5259",2,8 }, { "msp430f5304",2,8 }, { "msp430f5308",2,8 }, { "msp430f5309",2,8 }, { "msp430f5310",2,8 }, { "msp430f5324",2,8 }, { "msp430f5325",2,8 }, { "msp430f5326",2,8 }, { "msp430f5327",2,8 }, { "msp430f5328",2,8 }, { "msp430f5329",2,8 }, { "msp430f5333",2,8 }, { "msp430f5335",2,8 }, { "msp430f5336",2,8 }, { "msp430f5338",2,8 }, { "msp430f5340",2,8 }, { "msp430f5341",2,8 }, { "msp430f5342",2,8 }, { "msp430f5358",2,8 }, { "msp430f5359",2,8 }, { "msp430f5418",2,8 }, { "msp430f5418a",2,8 }, { "msp430f5419",2,8 }, { "msp430f5419a",2,8 }, { "msp430f5435",2,8 }, { "msp430f5435a",2,8 }, { "msp430f5436",2,8 }, { "msp430f5436a",2,8 }, { "msp430f5437",2,8 }, { "msp430f5437a",2,8 }, { "msp430f5438",2,8 }, { "msp430f5438a",2,8 }, { "msp430f5500",2,8 }, { "msp430f5501",2,8 }, { "msp430f5502",2,8 }, { "msp430f5503",2,8 }, { "msp430f5504",2,8 }, { "msp430f5505",2,8 }, { "msp430f5506",2,8 }, { "msp430f5507",2,8 }, { "msp430f5508",2,8 }, { "msp430f5509",2,8 }, { "msp430f5510",2,8 }, { "msp430f5513",2,8 }, { "msp430f5514",2,8 }, { "msp430f5515",2,8 }, { "msp430f5517",2,8 }, { "msp430f5519",2,8 }, { "msp430f5521",2,8 }, { "msp430f5522",2,8 }, { "msp430f5524",2,8 }, { "msp430f5525",2,8 }, { "msp430f5526",2,8 }, { "msp430f5527",2,8 }, { "msp430f5528",2,8 }, { "msp430f5529",2,8 }, { "msp430f5630",2,8 }, { "msp430f5631",2,8 }, { "msp430f5632",2,8 }, { "msp430f5633",2,8 }, { "msp430f5634",2,8 }, { "msp430f5635",2,8 }, { "msp430f5636",2,8 }, { "msp430f5637",2,8 }, { "msp430f5638",2,8 }, { "msp430f5658",2,8 }, { "msp430f5659",2,8 }, { "msp430f5xx_6xxgeneric",2,8 }, { "msp430f6433",2,8 }, { "msp430f6435",2,8 }, { "msp430f6436",2,8 }, { "msp430f6438",2,8 }, { "msp430f6458",2,8 }, { "msp430f6459",2,8 }, { "msp430f6630",2,8 }, { "msp430f6631",2,8 }, { "msp430f6632",2,8 }, { "msp430f6633",2,8 }, { "msp430f6634",2,8 }, { "msp430f6635",2,8 }, { "msp430f6636",2,8 }, { "msp430f6637",2,8 }, { "msp430f6638",2,8 }, { "msp430f6658",2,8 }, { "msp430f6659",2,8 }, { "msp430f6720",2,8 }, { "msp430f6720a",2,8 }, { "msp430f6721",2,8 }, { "msp430f6721a",2,8 }, { "msp430f6723",2,8 }, { "msp430f6723a",2,8 }, { "msp430f6724",2,8 }, { "msp430f6724a",2,8 }, { "msp430f6725",2,8 }, { "msp430f6725a",2,8 }, { "msp430f6726",2,8 }, { "msp430f6726a",2,8 }, { "msp430f6730",2,8 }, { "msp430f6730a",2,8 }, { "msp430f6731",2,8 }, { "msp430f6731a",2,8 }, { "msp430f6733",2,8 }, { "msp430f6733a",2,8 }, { "msp430f6734",2,8 }, { "msp430f6734a",2,8 }, { "msp430f6735",2,8 }, { "msp430f6735a",2,8 }, { "msp430f6736",2,8 }, { "msp430f6736a",2,8 }, { "msp430f6745",2,8 }, { "msp430f67451",2,8 }, { "msp430f67451a",2,8 }, { "msp430f6745a",2,8 }, { "msp430f6746",2,8 }, { "msp430f67461",2,8 }, { "msp430f67461a",2,8 }, { "msp430f6746a",2,8 }, { "msp430f6747",2,8 }, { "msp430f67471",2,8 }, { "msp430f67471a",2,8 }, { "msp430f6747a",2,8 }, { "msp430f6748",2,8 }, { "msp430f67481",2,8 }, { "msp430f67481a",2,8 }, { "msp430f6748a",2,8 }, { "msp430f6749",2,8 }, { "msp430f67491",2,8 }, { "msp430f67491a",2,8 }, { "msp430f6749a",2,8 }, { "msp430f67621",2,8 }, { "msp430f67621a",2,8 }, { "msp430f67641",2,8 }, { "msp430f67641a",2,8 }, { "msp430f6765",2,8 }, { "msp430f67651",2,8 }, { "msp430f67651a",2,8 }, { "msp430f6765a",2,8 }, { "msp430f6766",2,8 }, { "msp430f67661",2,8 }, { "msp430f67661a",2,8 }, { "msp430f6766a",2,8 }, { "msp430f6767",2,8 }, { "msp430f67671",2,8 }, { "msp430f67671a",2,8 }, { "msp430f6767a",2,8 }, { "msp430f6768",2,8 }, { "msp430f67681",2,8 }, { "msp430f67681a",2,8 }, { "msp430f6768a",2,8 }, { "msp430f6769",2,8 }, { "msp430f67691",2,8 }, { "msp430f67691a",2,8 }, { "msp430f6769a",2,8 }, { "msp430f6775",2,8 }, { "msp430f67751",2,8 }, { "msp430f67751a",2,8 }, { "msp430f6775a",2,8 }, { "msp430f6776",2,8 }, { "msp430f67761",2,8 }, { "msp430f67761a",2,8 }, { "msp430f6776a",2,8 }, { "msp430f6777",2,8 }, { "msp430f67771",2,8 }, { "msp430f67771a",2,8 }, { "msp430f6777a",2,8 }, { "msp430f6778",2,8 }, { "msp430f67781",2,8 }, { "msp430f67781a",2,8 }, { "msp430f6778a",2,8 }, { "msp430f6779",2,8 }, { "msp430f67791",2,8 }, { "msp430f67791a",2,8 }, { "msp430f6779a",2,8 }, { "msp430fe423",0,0 }, { "msp430fe4232",0,0 }, { "msp430fe423a",0,0 }, { "msp430fe4242",0,0 }, { "msp430fe425",0,0 }, { "msp430fe4252",0,0 }, { "msp430fe425a",0,0 }, { "msp430fe427",0,0 }, { "msp430fe4272",0,0 }, { "msp430fe427a",0,0 }, { "msp430fg4250",0,0 }, { "msp430fg4260",0,0 }, { "msp430fg4270",0,0 }, { "msp430fg437",0,0 }, { "msp430fg438",0,0 }, { "msp430fg439",0,0 }, { "msp430fg4616",1,1 }, { "msp430fg4617",1,1 }, { "msp430fg4618",1,1 }, { "msp430fg4619",1,1 }, { "msp430fg477",0,0 }, { "msp430fg478",0,0 }, { "msp430fg479",0,0 }, { "msp430fg6425",2,8 }, { "msp430fg6426",2,8 }, { "msp430fg6625",2,8 }, { "msp430fg6626",2,8 }, { "msp430fr2032",2,0 }, { "msp430fr2033",2,0 }, { "msp430fr2310",2,0 }, { "msp430fr2311",2,0 }, { "msp430fr2433",2,8 }, { "msp430fr2532",2,8 }, { "msp430fr2533",2,8 }, { "msp430fr2632",2,8 }, { "msp430fr2633",2,8 }, { "msp430fr2xx_4xxgeneric",2,8 }, { "msp430fr4131",2,0 }, { "msp430fr4132",2,0 }, { "msp430fr4133",2,0 }, { "msp430fr5720",2,8 }, { "msp430fr5721",2,8 }, { "msp430fr5722",2,8 }, { "msp430fr5723",2,8 }, { "msp430fr5724",2,8 }, { "msp430fr5725",2,8 }, { "msp430fr5726",2,8 }, { "msp430fr5727",2,8 }, { "msp430fr5728",2,8 }, { "msp430fr5729",2,8 }, { "msp430fr5730",2,8 }, { "msp430fr5731",2,8 }, { "msp430fr5732",2,8 }, { "msp430fr5733",2,8 }, { "msp430fr5734",2,8 }, { "msp430fr5735",2,8 }, { "msp430fr5736",2,8 }, { "msp430fr5737",2,8 }, { "msp430fr5738",2,8 }, { "msp430fr5739",2,8 }, { "msp430fr57xxgeneric",2,8 }, { "msp430fr5847",2,8 }, { "msp430fr58471",2,8 }, { "msp430fr5848",2,8 }, { "msp430fr5849",2,8 }, { "msp430fr5857",2,8 }, { "msp430fr5858",2,8 }, { "msp430fr5859",2,8 }, { "msp430fr5867",2,8 }, { "msp430fr5862",2,8 }, { "msp430fr5864",2,8 }, { "msp430fr58671",2,8 }, { "msp430fr5868",2,8 }, { "msp430fr5869",2,8 }, { "msp430fr5870",2,8 }, { "msp430fr5872",2,8 }, { "msp430fr58721",2,8 }, { "msp430fr5887",2,8 }, { "msp430fr5888",2,8 }, { "msp430fr5889",2,8 }, { "msp430fr58891",2,8 }, { "msp430fr5892",2,8 }, { "msp430fr5894",2,8 }, { "msp430fr5922",2,8 }, { "msp430fr59221",2,8 }, { "msp430fr5947",2,8 }, { "msp430fr59471",2,8 }, { "msp430fr5948",2,8 }, { "msp430fr5949",2,8 }, { "msp430fr5957",2,8 }, { "msp430fr5958",2,8 }, { "msp430fr5959",2,8 }, { "msp430fr5962",2,8 }, { "msp430fr5964",2,8 }, { "msp430fr5967",2,8 }, { "msp430fr5968",2,8 }, { "msp430fr5969",2,8 }, { "msp430fr59691",2,8 }, { "msp430fr5970",2,8 }, { "msp430fr5972",2,8 }, { "msp430fr59721",2,8 }, { "msp430fr5986",2,8 }, { "msp430fr5987",2,8 }, { "msp430fr5988",2,8 }, { "msp430fr5989",2,8 }, { "msp430fr59891",2,8 }, { "msp430fr5992",2,8 }, { "msp430fr5994",2,8 }, { "msp430fr5xx_6xxgeneric",2,8 }, { "msp430fr6820",2,8 }, { "msp430fr6822",2,8 }, { "msp430fr68221",2,8 }, { "msp430fr6870",2,8 }, { "msp430fr6872",2,8 }, { "msp430fr68721",2,8 }, { "msp430fr6877",2,8 }, { "msp430fr6879",2,8 }, { "msp430fr68791",2,8 }, { "msp430fr6887",2,8 }, { "msp430fr6888",2,8 }, { "msp430fr6889",2,8 }, { "msp430fr68891",2,8 }, { "msp430fr6920",2,8 }, { "msp430fr6922",2,8 }, { "msp430fr69221",2,8 }, { "msp430fr6927",2,8 }, { "msp430fr69271",2,8 }, { "msp430fr6928",2,8 }, { "msp430fr6970",2,8 }, { "msp430fr6972",2,8 }, { "msp430fr69721",2,8 }, { "msp430fr6977",2,8 }, { "msp430fr6979",2,8 }, { "msp430fr69791",2,8 }, { "msp430fr6987",2,8 }, { "msp430fr6988",2,8 }, { "msp430fr6989",2,8 }, { "msp430fr69891",2,8 }, { "msp430fw423",0,0 }, { "msp430fw425",0,0 }, { "msp430fw427",0,0 }, { "msp430fw428",0,0 }, { "msp430fw429",0,0 }, { "msp430g2001",0,0 }, { "msp430g2101",0,0 }, { "msp430g2102",0,0 }, { "msp430g2111",0,0 }, { "msp430g2112",0,0 }, { "msp430g2113",0,0 }, { "msp430g2121",0,0 }, { "msp430g2131",0,0 }, { "msp430g2132",0,0 }, { "msp430g2152",0,0 }, { "msp430g2153",0,0 }, { "msp430g2201",0,0 }, { "msp430g2202",0,0 }, { "msp430g2203",0,0 }, { "msp430g2210",0,0 }, { "msp430g2211",0,0 }, { "msp430g2212",0,0 }, { "msp430g2213",0,0 }, { "msp430g2221",0,0 }, { "msp430g2230",0,0 }, { "msp430g2231",0,0 }, { "msp430g2232",0,0 }, { "msp430g2233",0,0 }, { "msp430g2252",0,0 }, { "msp430g2253",0,0 }, { "msp430g2302",0,0 }, { "msp430g2303",0,0 }, { "msp430g2312",0,0 }, { "msp430g2313",0,0 }, { "msp430g2332",0,0 }, { "msp430g2333",0,0 }, { "msp430g2352",0,0 }, { "msp430g2353",0,0 }, { "msp430g2402",0,0 }, { "msp430g2403",0,0 }, { "msp430g2412",0,0 }, { "msp430g2413",0,0 }, { "msp430g2432",0,0 }, { "msp430g2433",0,0 }, { "msp430g2444",0,0 }, { "msp430g2452",0,0 }, { "msp430g2453",0,0 }, { "msp430g2513",0,0 }, { "msp430g2533",0,0 }, { "msp430g2544",0,0 }, { "msp430g2553",0,0 }, { "msp430g2744",0,0 }, { "msp430g2755",0,0 }, { "msp430g2855",0,0 }, { "msp430g2955",0,0 }, { "msp430i2020",0,2 }, { "msp430i2021",0,2 }, { "msp430i2030",0,2 }, { "msp430i2031",0,2 }, { "msp430i2040",0,2 }, { "msp430i2041",0,2 }, { "msp430i2xxgeneric",0,2 }, { "msp430l092",0,0 }, { "msp430p112",0,0 }, { "msp430p313",0,0 }, { "msp430p315",0,0 }, { "msp430p315s",0,0 }, { "msp430p325",0,0 }, { "msp430p337",0,1 }, { "msp430sl5438a",2,8 }, { "msp430tch5e",0,0 }, { "msp430xgeneric",2,8 }, { "rf430f5144",2,8 }, { "rf430f5155",2,8 }, { "rf430f5175",2,8 }, { "rf430frl152h",0,0 }, { "rf430frl152h_rom",0,0 }, { "rf430frl153h",0,0 }, { "rf430frl153h_rom",0,0 }, { "rf430frl154h",0,0 }, { "rf430frl154h_rom",0,0 } }; int md_parse_option (int c, const char * arg) { switch (c) { case OPTION_SILICON_ERRATA: case OPTION_SILICON_ERRATA_WARN: { signed int i; const struct { const char * name; unsigned int length; unsigned int bitfield; } erratas[] = { { STRING_COMMA_LEN ("cpu4"), SILICON_ERRATA_CPU4 }, { STRING_COMMA_LEN ("cpu8"), SILICON_ERRATA_CPU8 }, { STRING_COMMA_LEN ("cpu11"), SILICON_ERRATA_CPU11 }, { STRING_COMMA_LEN ("cpu12"), SILICON_ERRATA_CPU12 }, { STRING_COMMA_LEN ("cpu13"), SILICON_ERRATA_CPU13 }, { STRING_COMMA_LEN ("cpu19"), SILICON_ERRATA_CPU19 }, }; do { for (i = ARRAY_SIZE (erratas); i--;) if (strncasecmp (arg, erratas[i].name, erratas[i].length) == 0) { if (c == OPTION_SILICON_ERRATA) silicon_errata_fix |= erratas[i].bitfield; else silicon_errata_warn |= erratas[i].bitfield; arg += erratas[i].length; break; } if (i < 0) { as_warn (_("Unrecognised CPU errata name starting here: %s"), arg); break; } if (*arg == 0) break; if (*arg != ',') as_warn (_("Expecting comma after CPU errata name, not: %s"), arg); else arg ++; } while (*arg != 0); } return 1; case OPTION_MMCU: if (arg == NULL) as_fatal (_("MCU option requires a name\n")); if (strcasecmp ("msp430", arg) == 0) selected_isa = MSP_ISA_430; else if (strcasecmp ("msp430xv2", arg) == 0) selected_isa = MSP_ISA_430Xv2; else if (strcasecmp ("msp430x", arg) == 0) selected_isa = MSP_ISA_430X; else { int i; for (i = ARRAY_SIZE (msp430_mcu_data); i--;) if (strcasecmp (msp430_mcu_data[i].name, arg) == 0) { switch (msp430_mcu_data[i].revision) { case 0: selected_isa = MSP_ISA_430; break; case 1: selected_isa = MSP_ISA_430X; break; case 2: selected_isa = MSP_ISA_430Xv2; break; } break; } } /* It is not an error if we do not match the MCU name. */ return 1; case OPTION_MCPU: if (strcmp (arg, "430") == 0 || strcasecmp (arg, "msp430") == 0) selected_isa = MSP_ISA_430; else if (strcasecmp (arg, "430x") == 0 || strcasecmp (arg, "msp430x") == 0) selected_isa = MSP_ISA_430X; else if (strcasecmp (arg, "430xv2") == 0 || strcasecmp (arg, "msp430xv2") == 0) selected_isa = MSP_ISA_430Xv2; else as_fatal (_("unrecognised argument to -mcpu option '%s'"), arg); return 1; case OPTION_RELAX: msp430_enable_relax = 1; return 1; case OPTION_POLYMORPHS: msp430_enable_polys = 1; return 1; case OPTION_LARGE: large_model = TRUE; return 1; case OPTION_NO_INTR_NOPS: gen_interrupt_nops = FALSE; return 1; case OPTION_INTR_NOPS: gen_interrupt_nops = TRUE; return 1; case OPTION_WARN_INTR_NOPS: warn_interrupt_nops = TRUE; return 1; case OPTION_NO_WARN_INTR_NOPS: warn_interrupt_nops = FALSE; return 1; case OPTION_MOVE_DATA: move_data = TRUE; return 1; } return 0; } /* The intention here is to have the mere presence of these sections cause the object to have a reference to a well-known symbol. This reference pulls in the bits of the runtime (crt0) that initialize these sections. Thus, for example, the startup code to call memset() to initialize .bss will only be linked in when there is a non-empty .bss section. Otherwise, the call would exist but have a zero length parameter, which is a waste of memory and cycles. The code which initializes these sections should have a global label for these symbols, and should be marked with KEEP() in the linker script. */ static void msp430_make_init_symbols (const char * name) { if (strncmp (name, ".bss", 4) == 0 || strncmp (name, ".gnu.linkonce.b.", 16) == 0) (void) symbol_find_or_make ("__crt0_init_bss"); if (strncmp (name, ".data", 5) == 0 || strncmp (name, ".gnu.linkonce.d.", 16) == 0) (void) symbol_find_or_make ("__crt0_movedata"); /* Note - data assigned to the .either.data section may end up being placed in the .upper.data section if the .lower.data section is full. Hence the need to define the crt0 symbol. */ if (strncmp (name, ".either.data", 12) == 0 || strncmp (name, ".upper.data", 11) == 0) (void) symbol_find_or_make ("__crt0_move_highdata"); /* See note about .either.data above. */ if (strncmp (name, ".upper.bss", 10) == 0 || strncmp (name, ".either.bss", 11) == 0) (void) symbol_find_or_make ("__crt0_init_highbss"); } static void msp430_section (int arg) { char * saved_ilp = input_line_pointer; const char * name = obj_elf_section_name (); msp430_make_init_symbols (name); input_line_pointer = saved_ilp; obj_elf_section (arg); } void msp430_frob_section (asection *sec) { const char *name = sec->name; if (sec->size == 0) return; msp430_make_init_symbols (name); } static void msp430_lcomm (int ignore ATTRIBUTE_UNUSED) { symbolS *symbolP = s_comm_internal (0, s_lcomm_internal); if (symbolP) symbol_get_bfdsym (symbolP)->flags |= BSF_OBJECT; (void) symbol_find_or_make ("__crt0_init_bss"); } static void msp430_comm (int needs_align) { s_comm_internal (needs_align, elf_common_parse); (void) symbol_find_or_make ("__crt0_init_bss"); } static void msp430_refsym (int arg ATTRIBUTE_UNUSED) { char sym_name[1024]; input_line_pointer = extract_word (input_line_pointer, sym_name, 1024); (void) symbol_find_or_make (sym_name); } const pseudo_typeS md_pseudo_table[] = { {"arch", msp430_set_arch, OPTION_MMCU}, {"cpu", msp430_set_arch, OPTION_MCPU}, {"profiler", msp430_profiler, 0}, {"section", msp430_section, 0}, {"section.s", msp430_section, 0}, {"sect", msp430_section, 0}, {"sect.s", msp430_section, 0}, {"pushsection", msp430_section, 1}, {"refsym", msp430_refsym, 0}, {"comm", msp430_comm, 0}, {"lcomm", msp430_lcomm, 0}, {NULL, NULL, 0} }; const char *md_shortopts = "mm:,mP,mQ,ml,mN,mn,my,mY"; struct option md_longopts[] = { {"msilicon-errata", required_argument, NULL, OPTION_SILICON_ERRATA}, {"msilicon-errata-warn", required_argument, NULL, OPTION_SILICON_ERRATA_WARN}, {"mmcu", required_argument, NULL, OPTION_MMCU}, {"mcpu", required_argument, NULL, OPTION_MCPU}, {"mP", no_argument, NULL, OPTION_POLYMORPHS}, {"mQ", no_argument, NULL, OPTION_RELAX}, {"ml", no_argument, NULL, OPTION_LARGE}, {"mN", no_argument, NULL, OPTION_NO_INTR_NOPS}, {"mn", no_argument, NULL, OPTION_INTR_NOPS}, {"mY", no_argument, NULL, OPTION_NO_WARN_INTR_NOPS}, {"my", no_argument, NULL, OPTION_WARN_INTR_NOPS}, {"md", no_argument, NULL, OPTION_MOVE_DATA}, {NULL, no_argument, NULL, 0} }; size_t md_longopts_size = sizeof (md_longopts); void md_show_usage (FILE * stream) { fprintf (stream, _("MSP430 options:\n" " -mmcu= - select microcontroller type\n" " -mcpu={430|430x|430xv2} - select microcontroller architecture\n")); fprintf (stream, _(" -msilicon-errata=[,...] - enable fixups for silicon errata\n" " -msilicon-errata-warn=[,...] - warn when a fixup might be needed\n" " supported errata names: cpu4, cpu8, cpu11, cpu12, cpu13, cpu19\n")); fprintf (stream, _(" -mQ - enable relaxation at assembly time. DANGEROUS!\n" " -mP - enable polymorph instructions\n")); fprintf (stream, _(" -ml - enable large code model\n")); fprintf (stream, _(" -mN - do not insert NOPs after changing interrupts (default)\n")); fprintf (stream, _(" -mn - insert a NOP after changing interrupts\n")); fprintf (stream, _(" -mY - do not warn about missing NOPs after changing interrupts\n")); fprintf (stream, _(" -my - warn about missing NOPs after changing interrupts (default)\n")); fprintf (stream, _(" -md - Force copying of data from ROM to RAM at startup\n")); } symbolS * md_undefined_symbol (char * name ATTRIBUTE_UNUSED) { return NULL; } static char * extract_cmd (char * from, char * to, int limit) { int size = 0; while (*from && ! ISSPACE (*from) && *from != '.' && limit > size) { *(to + size) = *from; from++; size++; } *(to + size) = 0; return from; } const char * md_atof (int type, char * litP, int * sizeP) { return ieee_md_atof (type, litP, sizeP, FALSE); } void md_begin (void) { struct msp430_opcode_s * opcode; msp430_hash = hash_new (); for (opcode = msp430_opcodes; opcode->name; opcode++) hash_insert (msp430_hash, opcode->name, (char *) opcode); bfd_set_arch_mach (stdoutput, TARGET_ARCH, target_is_430x () ? bfd_mach_msp430x : bfd_mach_msp11); /* Set linkrelax here to avoid fixups in most sections. */ linkrelax = 1; } /* Returns the register number equivalent to the string T. Returns -1 if there is no such register. Skips a leading 'r' or 'R' character if there is one. Handles the register aliases PC and SP. */ static signed int check_reg (char * t) { signed int val; if (t == NULL) return -1; if (*t == 'r' || *t == 'R') ++t; if (strncasecmp (t, "pc", 2) == 0) return 0; if (strncasecmp (t, "sp", 2) == 0) return 1; if (strncasecmp (t, "sr", 2) == 0) return 2; if (*t == '0') return 0; val = atoi (t); if (val < 1 || val > 15) return -1; return val; } static int msp430_srcoperand (struct msp430_operand_s * op, char * l, int bin, bfd_boolean * imm_op, bfd_boolean allow_20bit_values, bfd_boolean constants_allowed) { char *__tl = l; /* Check if an immediate #VALUE. The hash sign should be only at the beginning! */ if (*l == '#') { char *h = l; int vshift = -1; int rval = 0; /* Check if there is: llo(x) - least significant 16 bits, x &= 0xffff lhi(x) - x = (x >> 16) & 0xffff, hlo(x) - x = (x >> 32) & 0xffff, hhi(x) - x = (x >> 48) & 0xffff The value _MUST_ be constant expression: #hlo(1231231231). */ *imm_op = TRUE; if (strncasecmp (h, "#llo(", 5) == 0) { vshift = 0; rval = 3; } else if (strncasecmp (h, "#lhi(", 5) == 0) { vshift = 1; rval = 3; } else if (strncasecmp (h, "#hlo(", 5) == 0) { vshift = 2; rval = 3; } else if (strncasecmp (h, "#hhi(", 5) == 0) { vshift = 3; rval = 3; } else if (strncasecmp (h, "#lo(", 4) == 0) { vshift = 0; rval = 2; } else if (strncasecmp (h, "#hi(", 4) == 0) { vshift = 1; rval = 2; } op->reg = 0; /* Reg PC. */ op->am = 3; op->ol = 1; /* Immediate will follow an instruction. */ __tl = h + 1 + rval; op->mode = OP_EXP; op->vshift = vshift; parse_exp (__tl, &(op->exp)); if (op->exp.X_op == O_constant) { int x = op->exp.X_add_number; if (vshift == 0) { x = x & 0xffff; op->exp.X_add_number = x; } else if (vshift == 1) { x = (x >> 16) & 0xffff; op->exp.X_add_number = x; op->vshift = 0; } else if (vshift > 1) { if (x < 0) op->exp.X_add_number = -1; else op->exp.X_add_number = 0; /* Nothing left. */ x = op->exp.X_add_number; op->vshift = 0; } if (allow_20bit_values) { if (op->exp.X_add_number > 0xfffff || op->exp.X_add_number < -524288) { as_bad (_("value 0x%x out of extended range."), x); return 1; } } else if (op->exp.X_add_number > 65535 || op->exp.X_add_number < -32768) { as_bad (_("value %d out of range. Use #lo() or #hi()"), x); return 1; } /* Now check constants. */ /* Substitute register mode with a constant generator if applicable. */ if (!allow_20bit_values) x = (short) x; /* Extend sign. */ if (! constants_allowed) ; else if (x == 0) { op->reg = 3; op->am = 0; op->ol = 0; op->mode = OP_REG; } else if (x == 1) { op->reg = 3; op->am = 1; op->ol = 0; op->mode = OP_REG; } else if (x == 2) { op->reg = 3; op->am = 2; op->ol = 0; op->mode = OP_REG; } else if (x == -1) { op->reg = 3; op->am = 3; op->ol = 0; op->mode = OP_REG; } else if (x == 4) { if (bin == 0x1200 && ! target_is_430x ()) { /* CPU4: The shorter form of PUSH #4 is not supported on MSP430. */ if (silicon_errata_warn & SILICON_ERRATA_CPU4) as_warn (_("cpu4: not converting PUSH #4 to shorter form")); /* No need to check silicon_errata_fixes - this fix is always implemented. */ } else { op->reg = 2; op->am = 2; op->ol = 0; op->mode = OP_REG; } } else if (x == 8) { if (bin == 0x1200 && ! target_is_430x ()) { /* CPU4: The shorter form of PUSH #8 is not supported on MSP430. */ if (silicon_errata_warn & SILICON_ERRATA_CPU4) as_warn (_("cpu4: not converting PUSH #8 to shorter form")); } else { op->reg = 2; op->am = 3; op->ol = 0; op->mode = OP_REG; } } } else if (op->exp.X_op == O_symbol) { if (vshift > 1) as_bad (_("error: unsupported #foo() directive used on symbol")); op->mode = OP_EXP; } else if (op->exp.X_op == O_big) { short x; if (vshift != -1) { op->exp.X_op = O_constant; op->exp.X_add_number = 0xffff & generic_bignum[vshift]; x = op->exp.X_add_number; op->vshift = 0; } else { as_bad (_ ("unknown expression in operand %s. use #llo() #lhi() #hlo() #hhi() "), l); return 1; } if (x == 0) { op->reg = 3; op->am = 0; op->ol = 0; op->mode = OP_REG; } else if (x == 1) { op->reg = 3; op->am = 1; op->ol = 0; op->mode = OP_REG; } else if (x == 2) { op->reg = 3; op->am = 2; op->ol = 0; op->mode = OP_REG; } else if (x == -1) { op->reg = 3; op->am = 3; op->ol = 0; op->mode = OP_REG; } else if (x == 4) { op->reg = 2; op->am = 2; op->ol = 0; op->mode = OP_REG; } else if (x == 8) { op->reg = 2; op->am = 3; op->ol = 0; op->mode = OP_REG; } } /* Redundant (yet) check. */ else if (op->exp.X_op == O_register) as_bad (_("Registers cannot be used within immediate expression [%s]"), l); else as_bad (_("unknown operand %s"), l); return 0; } /* Check if absolute &VALUE (assume that we can construct something like ((a&b)<<7 + 25). */ if (*l == '&') { char *h = l; op->reg = 2; /* reg 2 in absolute addr mode. */ op->am = 1; /* mode As == 01 bin. */ op->ol = 1; /* Immediate value followed by instruction. */ __tl = h + 1; parse_exp (__tl, &(op->exp)); op->mode = OP_EXP; op->vshift = 0; if (op->exp.X_op == O_constant) { int x = op->exp.X_add_number; if (allow_20bit_values) { if (x > 0xfffff || x < -(0x7ffff)) { as_bad (_("value 0x%x out of extended range."), x); return 1; } } else if (x > 65535 || x < -32768) { as_bad (_("value out of range: 0x%x"), x); return 1; } } else if (op->exp.X_op == O_symbol) ; else { /* Redundant (yet) check. */ if (op->exp.X_op == O_register) as_bad (_("Registers cannot be used within absolute expression [%s]"), l); else as_bad (_("unknown expression in operand %s"), l); return 1; } return 0; } /* Check if indirect register mode @Rn / postincrement @Rn+. */ if (*l == '@') { char *t = l; char *m = strchr (l, '+'); if (t != l) { as_bad (_("unknown addressing mode %s"), l); return 1; } t++; if ((op->reg = check_reg (t)) == -1) { as_bad (_("Bad register name %s"), t); return 1; } op->mode = OP_REG; op->am = m ? 3 : 2; op->ol = 0; /* PC cannot be used in indirect addressing. */ if (target_is_430xv2 () && op->reg == 0) { as_bad (_("cannot use indirect addressing with the PC")); return 1; } return 0; } /* Check if register indexed X(Rn). */ do { char *h = strrchr (l, '('); char *m = strrchr (l, ')'); char *t; *imm_op = TRUE; if (!h) break; if (!m) { as_bad (_("')' required")); return 1; } t = h; op->am = 1; op->ol = 1; /* Extract a register. */ if ((op->reg = check_reg (t + 1)) == -1) { as_bad (_ ("unknown operator %s. Did you mean X(Rn) or #[hl][hl][oi](CONST) ?"), l); return 1; } if (op->reg == 2) { as_bad (_("r2 should not be used in indexed addressing mode")); return 1; } /* Extract constant. */ __tl = l; *h = 0; op->mode = OP_EXP; op->vshift = 0; parse_exp (__tl, &(op->exp)); if (op->exp.X_op == O_constant) { int x = op->exp.X_add_number; if (allow_20bit_values) { if (x > 0xfffff || x < - (0x7ffff)) { as_bad (_("value 0x%x out of extended range."), x); return 1; } } else if (x > 65535 || x < -32768) { as_bad (_("value out of range: 0x%x"), x); return 1; } if (x == 0) { op->mode = OP_REG; op->am = 2; op->ol = 0; return 0; } if (op->reg == 1 && (x & 1)) { if (silicon_errata_fix & SILICON_ERRATA_CPU8) as_bad (_("CPU8: Stack pointer accessed with an odd offset")); else if (silicon_errata_warn & SILICON_ERRATA_CPU8) as_warn (_("CPU8: Stack pointer accessed with an odd offset")); } } else if (op->exp.X_op == O_symbol) ; else { /* Redundant (yet) check. */ if (op->exp.X_op == O_register) as_bad (_("Registers cannot be used as a prefix of indexed expression [%s]"), l); else as_bad (_("unknown expression in operand %s"), l); return 1; } return 0; } while (0); /* Possibly register mode 'mov r1,r2'. */ if ((op->reg = check_reg (l)) != -1) { op->mode = OP_REG; op->am = 0; op->ol = 0; return 0; } /* Symbolic mode 'mov a, b' == 'mov x(pc), y(pc)'. */ do { op->mode = OP_EXP; op->reg = 0; /* PC relative... be careful. */ /* An expression starting with a minus sign is a constant, not an address. */ op->am = (*l == '-' ? 3 : 1); op->ol = 1; op->vshift = 0; __tl = l; parse_exp (__tl, &(op->exp)); return 0; } while (0); /* Unreachable. */ as_bad (_("unknown addressing mode for operand %s"), l); return 1; } static int msp430_dstoperand (struct msp430_operand_s * op, char * l, int bin, bfd_boolean allow_20bit_values, bfd_boolean constants_allowed) { int dummy; int ret = msp430_srcoperand (op, l, bin, & dummy, allow_20bit_values, constants_allowed); if (ret) return ret; if (op->am == 2) { char *__tl = (char *) "0"; op->mode = OP_EXP; op->am = 1; op->ol = 1; op->vshift = 0; parse_exp (__tl, &(op->exp)); if (op->exp.X_op != O_constant || op->exp.X_add_number != 0) { as_bad (_("Internal bug. Try to use 0(r%d) instead of @r%d"), op->reg, op->reg); return 1; } return 0; } if (op->am > 1) { as_bad (_ ("this addressing mode is not applicable for destination operand")); return 1; } return 0; } /* Attempt to encode a MOVA instruction with the given operands. Returns the length of the encoded instruction if successful or 0 upon failure. If the encoding fails, an error message will be returned if a pointer is provided. */ static int try_encode_mova (bfd_boolean imm_op, int bin, struct msp430_operand_s * op1, struct msp430_operand_s * op2, const char ** error_message_return) { short ZEROS = 0; char *frag; int where; /* Only a restricted subset of the normal MSP430 addressing modes are supported here, so check for the ones that are allowed. */ if (imm_op) { if (op1->mode == OP_EXP) { if (op2->mode != OP_REG) { if (error_message_return != NULL) * error_message_return = _("expected register as second argument of %s"); return 0; } if (op1->am == 3) { /* MOVA #imm20, Rdst. */ bin |= 0x80 | op2->reg; frag = frag_more (4); where = frag - frag_now->fr_literal; if (op1->exp.X_op == O_constant) { bin |= ((op1->exp.X_add_number >> 16) & 0xf) << 8; bfd_putl16 ((bfd_vma) bin, frag); bfd_putl16 (op1->exp.X_add_number & 0xffff, frag + 2); } else { bfd_putl16 ((bfd_vma) bin, frag); fix_new_exp (frag_now, where, 4, &(op1->exp), FALSE, BFD_RELOC_MSP430X_ABS20_ADR_SRC); bfd_putl16 ((bfd_vma) ZEROS, frag + 2); } return 4; } else if (op1->am == 1) { /* MOVA z16(Rsrc), Rdst. */ bin |= 0x30 | (op1->reg << 8) | op2->reg; frag = frag_more (4); where = frag - frag_now->fr_literal; bfd_putl16 ((bfd_vma) bin, frag); if (op1->exp.X_op == O_constant) { if (op1->exp.X_add_number > 0xffff || op1->exp.X_add_number < -(0x7fff)) { if (error_message_return != NULL) * error_message_return = _("index value too big for %s"); return 0; } bfd_putl16 (op1->exp.X_add_number & 0xffff, frag + 2); } else { bfd_putl16 ((bfd_vma) ZEROS, frag + 2); fix_new_exp (frag_now, where + 2, 2, &(op1->exp), FALSE, op1->reg == 0 ? BFD_RELOC_MSP430X_PCR16 : BFD_RELOC_MSP430X_ABS16); } return 4; } if (error_message_return != NULL) * error_message_return = _("unexpected addressing mode for %s"); return 0; } else if (op1->am == 0) { /* MOVA Rsrc, ... */ if (op2->mode == OP_REG) { bin |= 0xc0 | (op1->reg << 8) | op2->reg; frag = frag_more (2); where = frag - frag_now->fr_literal; bfd_putl16 ((bfd_vma) bin, frag); return 2; } else if (op2->am == 1) { if (op2->reg == 2) { /* MOVA Rsrc, &abs20. */ bin |= 0x60 | (op1->reg << 8); frag = frag_more (4); where = frag - frag_now->fr_literal; if (op2->exp.X_op == O_constant) { bin |= (op2->exp.X_add_number >> 16) & 0xf; bfd_putl16 ((bfd_vma) bin, frag); bfd_putl16 (op2->exp.X_add_number & 0xffff, frag + 2); } else { bfd_putl16 ((bfd_vma) bin, frag); bfd_putl16 ((bfd_vma) ZEROS, frag + 2); fix_new_exp (frag_now, where, 4, &(op2->exp), FALSE, BFD_RELOC_MSP430X_ABS20_ADR_DST); } return 4; } /* MOVA Rsrc, z16(Rdst). */ bin |= 0x70 | (op1->reg << 8) | op2->reg; frag = frag_more (4); where = frag - frag_now->fr_literal; bfd_putl16 ((bfd_vma) bin, frag); if (op2->exp.X_op == O_constant) { if (op2->exp.X_add_number > 0xffff || op2->exp.X_add_number < -(0x7fff)) { if (error_message_return != NULL) * error_message_return = _("index value too big for %s"); return 0; } bfd_putl16 (op2->exp.X_add_number & 0xffff, frag + 2); } else { bfd_putl16 ((bfd_vma) ZEROS, frag + 2); fix_new_exp (frag_now, where + 2, 2, &(op2->exp), FALSE, op2->reg == 0 ? BFD_RELOC_MSP430X_PCR16 : BFD_RELOC_MSP430X_ABS16); } return 4; } if (error_message_return != NULL) * error_message_return = _("unexpected addressing mode for %s"); return 0; } } /* imm_op == FALSE. */ if (op1->reg == 2 && op1->am == 1 && op1->mode == OP_EXP) { /* MOVA &abs20, Rdst. */ if (op2->mode != OP_REG) { if (error_message_return != NULL) * error_message_return = _("expected register as second argument of %s"); return 0; } if (op2->reg == 2 || op2->reg == 3) { if (error_message_return != NULL) * error_message_return = _("constant generator destination register found in %s"); return 0; } bin |= 0x20 | op2->reg; frag = frag_more (4); where = frag - frag_now->fr_literal; if (op1->exp.X_op == O_constant) { bin |= ((op1->exp.X_add_number >> 16) & 0xf) << 8; bfd_putl16 ((bfd_vma) bin, frag); bfd_putl16 (op1->exp.X_add_number & 0xffff, frag + 2); } else { bfd_putl16 ((bfd_vma) bin, frag); bfd_putl16 ((bfd_vma) ZEROS, frag + 2); fix_new_exp (frag_now, where, 4, &(op1->exp), FALSE, BFD_RELOC_MSP430X_ABS20_ADR_SRC); } return 4; } else if (op1->mode == OP_REG) { if (op1->am == 3) { /* MOVA @Rsrc+, Rdst. */ if (op2->mode != OP_REG) { if (error_message_return != NULL) * error_message_return = _("expected register as second argument of %s"); return 0; } if (op2->reg == 2 || op2->reg == 3) { if (error_message_return != NULL) * error_message_return = _("constant generator destination register found in %s"); return 0; } if (op1->reg == 2 || op1->reg == 3) { if (error_message_return != NULL) * error_message_return = _("constant generator source register found in %s"); return 0; } bin |= 0x10 | (op1->reg << 8) | op2->reg; frag = frag_more (2); where = frag - frag_now->fr_literal; bfd_putl16 ((bfd_vma) bin, frag); return 2; } else if (op1->am == 2) { /* MOVA @Rsrc,Rdst */ if (op2->mode != OP_REG) { if (error_message_return != NULL) * error_message_return = _("expected register as second argument of %s"); return 0; } if (op2->reg == 2 || op2->reg == 3) { if (error_message_return != NULL) * error_message_return = _("constant generator destination register found in %s"); return 0; } if (op1->reg == 2 || op1->reg == 3) { if (error_message_return != NULL) * error_message_return = _("constant generator source register found in %s"); return 0; } bin |= (op1->reg << 8) | op2->reg; frag = frag_more (2); where = frag - frag_now->fr_literal; bfd_putl16 ((bfd_vma) bin, frag); return 2; } } if (error_message_return != NULL) * error_message_return = _("unexpected addressing mode for %s"); return 0; } #define NOP_CHECK_INTERRUPT (1 << 0) #define NOP_CHECK_CPU12 (1 << 1) #define NOP_CHECK_CPU19 (1 << 2) static signed int check_for_nop = 0; #define is_opcode(NAME) (strcmp (opcode->name, NAME) == 0) /* Parse instruction operands. Return binary opcode. */ static unsigned int msp430_operands (struct msp430_opcode_s * opcode, char * line) { int bin = opcode->bin_opcode; /* Opcode mask. */ int insn_length = 0; char l1[MAX_OP_LEN], l2[MAX_OP_LEN]; char *frag; int where; struct msp430_operand_s op1, op2; int res = 0; static short ZEROS = 0; bfd_boolean byte_op, imm_op; int op_length = 0; int fmt; int extended = 0x1800; bfd_boolean extended_op = FALSE; bfd_boolean addr_op; const char * error_message; static signed int repeat_count = 0; static bfd_boolean prev_insn_is_nop = FALSE; bfd_boolean fix_emitted; /* Opcode is the one from opcodes table line contains something like [.w] @r2+, 5(R1) or .b @r2+, 5(R1). */ byte_op = FALSE; addr_op = FALSE; if (*line == '.') { bfd_boolean check = FALSE; ++ line; switch (TOLOWER (* line)) { case 'b': /* Byte operation. */ bin |= BYTE_OPERATION; byte_op = TRUE; check = TRUE; break; case 'a': /* "Address" ops work on 20-bit values. */ addr_op = TRUE; bin |= BYTE_OPERATION; check = TRUE; break; case 'w': /* Word operation - this is the default. */ check = TRUE; break; case 0: case ' ': case '\n': case '\r': as_warn (_("no size modifier after period, .w assumed")); break; default: as_bad (_("unrecognised instruction size modifier .%c"), * line); return 0; } if (check) { ++ line; } } if (*line && ! ISSPACE (*line)) { as_bad (_("junk found after instruction: %s.%s"), opcode->name, line); return 0; } /* Catch the case where the programmer has used a ".a" size modifier on an instruction that does not support it. Look for an alternative extended instruction that has the same name without the period. Eg: "add.a" becomes "adda". Although this not an officially supported way of specifing instruction aliases other MSP430 assemblers allow it. So we support it for compatibility purposes. */ if (addr_op && opcode->fmt >= 0) { const char * old_name = opcode->name; char real_name[32]; sprintf (real_name, "%sa", old_name); opcode = hash_find (msp430_hash, real_name); if (opcode == NULL) { as_bad (_("instruction %s.a does not exist"), old_name); return 0; } #if 0 /* Enable for debugging. */ as_warn ("treating %s.a as %s", old_name, real_name); #endif addr_op = FALSE; bin = opcode->bin_opcode; } if (opcode->fmt != -1 && opcode->insn_opnumb && (!*line || *line == '\n')) { as_bad (_("instruction %s requires %d operand(s)"), opcode->name, opcode->insn_opnumb); return 0; } memset (l1, 0, sizeof (l1)); memset (l2, 0, sizeof (l2)); memset (&op1, 0, sizeof (op1)); memset (&op2, 0, sizeof (op2)); imm_op = FALSE; if ((fmt = opcode->fmt) < 0) { if (! target_is_430x ()) { as_bad (_("instruction %s requires MSP430X mcu"), opcode->name); return 0; } fmt = (-fmt) - 1; extended_op = TRUE; } if (repeat_count) { /* If requested set the extended instruction repeat count. */ if (extended_op) { if (repeat_count > 0) extended |= (repeat_count - 1); else extended |= (1 << 7) | (- repeat_count); } else as_bad (_("unable to repeat %s insn"), opcode->name); repeat_count = 0; } if (check_for_nop) { if (! is_opcode ("nop")) { bfd_boolean doit = FALSE; do { switch (check_for_nop & - check_for_nop) { case NOP_CHECK_INTERRUPT: if (warn_interrupt_nops) { if (gen_interrupt_nops) as_warn (_("NOP inserted between two instructions that change interrupt state")); else as_warn (_("a NOP might be needed here because of successive changes in interrupt state")); } if (gen_interrupt_nops) /* Emit a NOP between interrupt enable/disable. See 1.3.4.1 of the MSP430x5xx User Guide. */ doit = TRUE; break; case NOP_CHECK_CPU12: if (silicon_errata_warn & SILICON_ERRATA_CPU12) as_warn (_("CPU12: CMP/BIT with PC destinstion ignores next instruction")); if (silicon_errata_fix & SILICON_ERRATA_CPU12) doit = TRUE; break; case NOP_CHECK_CPU19: if (silicon_errata_warn & SILICON_ERRATA_CPU19) as_warn (_("CPU19: Instruction setting CPUOFF must be followed by a NOP")); if (silicon_errata_fix & SILICON_ERRATA_CPU19) doit = TRUE; break; default: as_bad (_("internal error: unknown nop check state")); break; } check_for_nop &= ~ (check_for_nop & - check_for_nop); } while (check_for_nop); if (doit) { frag = frag_more (2); bfd_putl16 ((bfd_vma) 0x4303 /* NOP */, frag); dwarf2_emit_insn (2); } } check_for_nop = 0; } switch (fmt) { case 0: /* Emulated. */ switch (opcode->insn_opnumb) { case 0: if (is_opcode ("eint")) { if (! prev_insn_is_nop) { if (gen_interrupt_nops) { frag = frag_more (2); bfd_putl16 ((bfd_vma) 0x4303 /* NOP */, frag); dwarf2_emit_insn (2); if (warn_interrupt_nops) as_warn (_("inserting a NOP before EINT")); } else if (warn_interrupt_nops) as_warn (_("a NOP might be needed before the EINT")); } } else if (is_opcode ("dint")) check_for_nop |= NOP_CHECK_INTERRUPT; /* Set/clear bits instructions. */ if (extended_op) { if (!addr_op) extended |= BYTE_OPERATION; /* Emit the extension word. */ insn_length += 2; frag = frag_more (2); bfd_putl16 (extended, frag); } insn_length += 2; frag = frag_more (2); bfd_putl16 ((bfd_vma) bin, frag); dwarf2_emit_insn (insn_length); break; case 1: /* Something which works with destination operand. */ line = extract_operand (line, l1, sizeof (l1)); res = msp430_dstoperand (&op1, l1, opcode->bin_opcode, extended_op, TRUE); if (res) break; bin |= (op1.reg | (op1.am << 7)); /* If the PC is the destination... */ if (op1.am == 0 && op1.reg == 0 /* ... and the opcode alters the SR. */ && !(is_opcode ("bic") || is_opcode ("bis") || is_opcode ("mov") || is_opcode ("bicx") || is_opcode ("bisx") || is_opcode ("movx"))) { if (silicon_errata_fix & SILICON_ERRATA_CPU11) as_bad (_("CPU11: PC is destinstion of SR altering instruction")); else if (silicon_errata_warn & SILICON_ERRATA_CPU11) as_warn (_("CPU11: PC is destinstion of SR altering instruction")); } /* If the status register is the destination... */ if (op1.am == 0 && op1.reg == 2 /* ... and the opcode alters the SR. */ && (is_opcode ("adc") || is_opcode ("dec") || is_opcode ("decd") || is_opcode ("inc") || is_opcode ("incd") || is_opcode ("inv") || is_opcode ("sbc") || is_opcode ("sxt") || is_opcode ("adcx") || is_opcode ("decx") || is_opcode ("decdx") || is_opcode ("incx") || is_opcode ("incdx") || is_opcode ("invx") || is_opcode ("sbcx") )) { if (silicon_errata_fix & SILICON_ERRATA_CPU13) as_bad (_("CPU13: SR is destinstion of SR altering instruction")); else if (silicon_errata_warn & SILICON_ERRATA_CPU13) as_warn (_("CPU13: SR is destinstion of SR altering instruction")); } if (is_opcode ("clr") && bin == 0x4302 /* CLR R2*/) check_for_nop |= NOP_CHECK_INTERRUPT; /* Compute the entire instruction length, in bytes. */ op_length = (extended_op ? 2 : 0) + 2 + (op1.ol * 2); insn_length += op_length; frag = frag_more (op_length); where = frag - frag_now->fr_literal; if (extended_op) { if (!addr_op) extended |= BYTE_OPERATION; if (op1.ol != 0 && ((extended & 0xf) != 0)) { as_bad (_("repeat instruction used with non-register mode instruction")); extended &= ~ 0xf; } if (op1.mode == OP_EXP) { if (op1.exp.X_op == O_constant) extended |= ((op1.exp.X_add_number >> 16) & 0xf) << 7; else if (op1.reg || op1.am == 3) /* Not PC relative. */ fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE, BFD_RELOC_MSP430X_ABS20_EXT_SRC); else fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE, BFD_RELOC_MSP430X_PCR20_EXT_SRC); } /* Emit the extension word. */ bfd_putl16 (extended, frag); frag += 2; where += 2; } bfd_putl16 ((bfd_vma) bin, frag); frag += 2; where += 2; if (op1.mode == OP_EXP) { if (op1.exp.X_op == O_constant) { bfd_putl16 (op1.exp.X_add_number & 0xffff, frag); } else { bfd_putl16 ((bfd_vma) ZEROS, frag); if (!extended_op) { if (op1.reg) fix_new_exp (frag_now, where, 2, &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1)); else fix_new_exp (frag_now, where, 2, &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL); } } } dwarf2_emit_insn (insn_length); break; case 2: /* Shift instruction. */ line = extract_operand (line, l1, sizeof (l1)); strncpy (l2, l1, sizeof (l2)); l2[sizeof (l2) - 1] = '\0'; res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op, extended_op, TRUE); res += msp430_dstoperand (&op2, l2, opcode->bin_opcode, extended_op, TRUE); if (res) break; /* An error occurred. All warnings were done before. */ insn_length = (extended_op ? 2 : 0) + 2 + (op1.ol * 2) + (op2.ol * 2); frag = frag_more (insn_length); where = frag - frag_now->fr_literal; if (target_is_430xv2 () && op1.mode == OP_REG && op1.reg == 0 && (is_opcode ("rlax") || is_opcode ("rlcx") || is_opcode ("rla") || is_opcode ("rlc"))) { as_bad (_("%s: attempt to rotate the PC register"), opcode->name); break; } /* If the status register is the destination... */ if (op1.am == 0 && op1.reg == 2 /* ... and the opcode alters the SR. */ && (is_opcode ("rla") || is_opcode ("rlc") || is_opcode ("rlax") || is_opcode ("rlcx") )) { if (silicon_errata_fix & SILICON_ERRATA_CPU13) as_bad (_("CPU13: SR is destinstion of SR altering instruction")); else if (silicon_errata_warn & SILICON_ERRATA_CPU13) as_warn (_("CPU13: SR is destinstion of SR altering instruction")); } if (extended_op) { if (!addr_op) extended |= BYTE_OPERATION; if ((op1.ol != 0 || op2.ol != 0) && ((extended & 0xf) != 0)) { as_bad (_("repeat instruction used with non-register mode instruction")); extended &= ~ 0xf; } if (op1.mode == OP_EXP) { if (op1.exp.X_op == O_constant) extended |= ((op1.exp.X_add_number >> 16) & 0xf) << 7; else if (op1.reg || op1.am == 3) /* Not PC relative. */ fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE, BFD_RELOC_MSP430X_ABS20_EXT_SRC); else fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE, BFD_RELOC_MSP430X_PCR20_EXT_SRC); } if (op2.mode == OP_EXP) { if (op2.exp.X_op == O_constant) extended |= (op2.exp.X_add_number >> 16) & 0xf; else if (op1.mode == OP_EXP) fix_new_exp (frag_now, where, 8, &(op2.exp), FALSE, op2.reg ? BFD_RELOC_MSP430X_ABS20_EXT_ODST : BFD_RELOC_MSP430X_PCR20_EXT_ODST); else fix_new_exp (frag_now, where, 6, &(op2.exp), FALSE, op2.reg ? BFD_RELOC_MSP430X_ABS20_EXT_DST : BFD_RELOC_MSP430X_PCR20_EXT_DST); } /* Emit the extension word. */ bfd_putl16 (extended, frag); frag += 2; where += 2; } bin |= (op2.reg | (op1.reg << 8) | (op1.am << 4) | (op2.am << 7)); bfd_putl16 ((bfd_vma) bin, frag); frag += 2; where += 2; if (op1.mode == OP_EXP) { if (op1.exp.X_op == O_constant) { bfd_putl16 (op1.exp.X_add_number & 0xffff, frag); } else { bfd_putl16 ((bfd_vma) ZEROS, frag); if (!extended_op) { if (op1.reg || op1.am == 3) /* Not PC relative. */ fix_new_exp (frag_now, where, 2, &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1)); else fix_new_exp (frag_now, where, 2, &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL); } } frag += 2; where += 2; } if (op2.mode == OP_EXP) { if (op2.exp.X_op == O_constant) { bfd_putl16 (op2.exp.X_add_number & 0xffff, frag); } else { bfd_putl16 ((bfd_vma) ZEROS, frag); if (!extended_op) { if (op2.reg) /* Not PC relative. */ fix_new_exp (frag_now, where, 2, &(op2.exp), FALSE, CHECK_RELOC_MSP430 (op2)); else fix_new_exp (frag_now, where, 2, &(op2.exp), TRUE, CHECK_RELOC_MSP430_PCREL); } } } dwarf2_emit_insn (insn_length); break; case 3: /* Branch instruction => mov dst, r0. */ if (extended_op) { as_bad ("Internal error: state 0/3 not coded for extended instructions"); break; } line = extract_operand (line, l1, sizeof (l1)); res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op, extended_op, FALSE); if (res) break; byte_op = FALSE; imm_op = FALSE; bin |= ((op1.reg << 8) | (op1.am << 4)); op_length = 2 + 2 * op1.ol; frag = frag_more (op_length); where = frag - frag_now->fr_literal; bfd_putl16 ((bfd_vma) bin, frag); if (op1.mode == OP_EXP) { if (op1.exp.X_op == O_constant) { bfd_putl16 (op1.exp.X_add_number & 0xffff, frag + 2); } else { where += 2; bfd_putl16 ((bfd_vma) ZEROS, frag + 2); if (op1.reg || op1.am == 3) fix_new_exp (frag_now, where, 2, &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1)); else fix_new_exp (frag_now, where, 2, &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL); } } dwarf2_emit_insn (insn_length + op_length); break; case 4: /* CALLA instructions. */ fix_emitted = FALSE; line = extract_operand (line, l1, sizeof (l1)); imm_op = FALSE; res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op, extended_op, FALSE); if (res) break; byte_op = FALSE; op_length = 2 + 2 * op1.ol; frag = frag_more (op_length); where = frag - frag_now->fr_literal; if (imm_op) { if (op1.am == 3) { bin |= 0xb0; fix_new_exp (frag_now, where, 4, &(op1.exp), FALSE, BFD_RELOC_MSP430X_ABS20_ADR_DST); fix_emitted = TRUE; } else if (op1.am == 1) { if (op1.reg == 0) { bin |= 0x90; fix_new_exp (frag_now, where, 4, &(op1.exp), FALSE, BFD_RELOC_MSP430X_PCR20_CALL); fix_emitted = TRUE; } else bin |= 0x50 | op1.reg; } else if (op1.am == 0) bin |= 0x40 | op1.reg; } else if (op1.am == 1) { bin |= 0x80; fix_new_exp (frag_now, where, 4, &(op1.exp), FALSE, BFD_RELOC_MSP430X_ABS20_ADR_DST); fix_emitted = TRUE; } else if (op1.am == 2) bin |= 0x60 | op1.reg; else if (op1.am == 3) bin |= 0x70 | op1.reg; bfd_putl16 ((bfd_vma) bin, frag); if (op1.mode == OP_EXP) { if (op1.ol != 1) { as_bad ("Internal error: unexpected CALLA instruction length: %d\n", op1.ol); break; } bfd_putl16 ((bfd_vma) ZEROS, frag + 2); if (! fix_emitted) fix_new_exp (frag_now, where + 2, 2, &(op1.exp), FALSE, BFD_RELOC_16); } dwarf2_emit_insn (insn_length + op_length); break; case 5: { int n; int reg; /* [POP|PUSH]M[.A] #N, Rd */ line = extract_operand (line, l1, sizeof (l1)); line = extract_operand (line, l2, sizeof (l2)); if (*l1 != '#') { as_bad (_("expected #n as first argument of %s"), opcode->name); break; } parse_exp (l1 + 1, &(op1.exp)); if (op1.exp.X_op != O_constant) { as_bad (_("expected constant expression for first argument of %s"), opcode->name); break; } if ((reg = check_reg (l2)) == -1) { as_bad (_("expected register as second argument of %s"), opcode->name); break; } op_length = 2; frag = frag_more (op_length); where = frag - frag_now->fr_literal; bin = opcode->bin_opcode; if (! addr_op) bin |= 0x100; n = op1.exp.X_add_number; bin |= (n - 1) << 4; if (is_opcode ("pushm")) bin |= reg; else { if (reg - n + 1 < 0) { as_bad (_("Too many registers popped")); break; } /* CPU21 errata: cannot use POPM to restore the SR register. */ if (target_is_430xv2 () && (reg - n + 1 < 3) && reg >= 2 && is_opcode ("popm")) { as_bad (_("Cannot use POPM to restore the SR register")); break; } bin |= (reg - n + 1); } bfd_putl16 ((bfd_vma) bin, frag); dwarf2_emit_insn (op_length); break; } case 6: { int n; int reg; /* Bit rotation instructions. RRCM, RRAM, RRUM, RLAM. */ if (extended & 0xff) { as_bad (_("repeat count cannot be used with %s"), opcode->name); break; } line = extract_operand (line, l1, sizeof (l1)); line = extract_operand (line, l2, sizeof (l2)); if (*l1 != '#') { as_bad (_("expected #n as first argument of %s"), opcode->name); break; } parse_exp (l1 + 1, &(op1.exp)); if (op1.exp.X_op != O_constant) { as_bad (_("expected constant expression for first argument of %s"), opcode->name); break; } n = op1.exp.X_add_number; if (n > 4 || n < 1) { as_bad (_("expected first argument of %s to be in the range 1-4"), opcode->name); break; } if ((reg = check_reg (l2)) == -1) { as_bad (_("expected register as second argument of %s"), opcode->name); break; } if (target_is_430xv2 () && reg == 0) { as_bad (_("%s: attempt to rotate the PC register"), opcode->name); break; } op_length = 2; frag = frag_more (op_length); where = frag - frag_now->fr_literal; bin = opcode->bin_opcode; if (! addr_op) bin |= 0x10; bin |= (n - 1) << 10; bin |= reg; bfd_putl16 ((bfd_vma) bin, frag); dwarf2_emit_insn (op_length); break; } case 8: { bfd_boolean need_reloc = FALSE; int n; int reg; /* ADDA, CMPA and SUBA address instructions. */ if (extended & 0xff) { as_bad (_("repeat count cannot be used with %s"), opcode->name); break; } line = extract_operand (line, l1, sizeof (l1)); line = extract_operand (line, l2, sizeof (l2)); bin = opcode->bin_opcode; if (*l1 == '#') { parse_exp (l1 + 1, &(op1.exp)); if (op1.exp.X_op == O_constant) { n = op1.exp.X_add_number; if (n > 0xfffff || n < - (0x7ffff)) { as_bad (_("expected value of first argument of %s to fit into 20-bits"), opcode->name); break; } bin |= ((n >> 16) & 0xf) << 8; } else { n = 0; need_reloc = TRUE; } op_length = 4; } else { if ((n = check_reg (l1)) == -1) { as_bad (_("expected register name or constant as first argument of %s"), opcode->name); break; } bin |= (n << 8) | (1 << 6); op_length = 2; } if ((reg = check_reg (l2)) == -1) { as_bad (_("expected register as second argument of %s"), opcode->name); break; } frag = frag_more (op_length); where = frag - frag_now->fr_literal; bin |= reg; if (need_reloc) fix_new_exp (frag_now, where, 4, &(op1.exp), FALSE, BFD_RELOC_MSP430X_ABS20_ADR_SRC); bfd_putl16 ((bfd_vma) bin, frag); if (op_length == 4) bfd_putl16 ((bfd_vma) (n & 0xffff), frag + 2); dwarf2_emit_insn (op_length); break; } case 9: /* MOVA, BRA, RETA. */ imm_op = FALSE; bin = opcode->bin_opcode; if (is_opcode ("reta")) { /* The RETA instruction does not take any arguments. The implicit first argument is @SP+. The implicit second argument is PC. */ op1.mode = OP_REG; op1.am = 3; op1.reg = 1; op2.mode = OP_REG; op2.reg = 0; } else { line = extract_operand (line, l1, sizeof (l1)); res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op, extended_op, FALSE); if (is_opcode ("bra")) { /* This is the BRA synthetic instruction. The second argument is always PC. */ op2.mode = OP_REG; op2.reg = 0; } else { line = extract_operand (line, l2, sizeof (l2)); res += msp430_dstoperand (&op2, l2, opcode->bin_opcode, extended_op, TRUE); } if (res) break; /* Error occurred. All warnings were done before. */ } /* Only a restricted subset of the normal MSP430 addressing modes are supported here, so check for the ones that are allowed. */ if ((op_length = try_encode_mova (imm_op, bin, & op1, & op2, & error_message)) == 0) { as_bad (error_message, opcode->name); break; } dwarf2_emit_insn (op_length); break; case 10: /* RPT */ line = extract_operand (line, l1, sizeof l1); /* The RPT instruction only accepted immediates and registers. */ if (*l1 == '#') { parse_exp (l1 + 1, &(op1.exp)); if (op1.exp.X_op != O_constant) { as_bad (_("expected constant value as argument to RPT")); break; } if (op1.exp.X_add_number < 1 || op1.exp.X_add_number > (1 << 4)) { as_bad (_("expected constant in the range 2..16")); break; } /* We silently accept and ignore a repeat count of 1. */ if (op1.exp.X_add_number > 1) repeat_count = op1.exp.X_add_number; } else { int reg; if ((reg = check_reg (l1)) != -1) { if (reg == 0) as_warn (_("PC used as an argument to RPT")); else repeat_count = - reg; } else { as_bad (_("expected constant or register name as argument to RPT insn")); break; } } break; default: as_bad (_("Illegal emulated instruction ")); break; } break; case 1: /* Format 1, double operand. */ line = extract_operand (line, l1, sizeof (l1)); line = extract_operand (line, l2, sizeof (l2)); res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op, extended_op, TRUE); res += msp430_dstoperand (&op2, l2, opcode->bin_opcode, extended_op, TRUE); if (res) break; /* Error occurred. All warnings were done before. */ if (extended_op && is_opcode ("movx") && addr_op && msp430_enable_relax) { /* This is the MOVX.A instruction. See if we can convert it into the MOVA instruction instead. This saves 2 bytes. */ if ((op_length = try_encode_mova (imm_op, 0x0000, & op1, & op2, NULL)) != 0) { dwarf2_emit_insn (op_length); break; } } bin |= (op2.reg | (op1.reg << 8) | (op1.am << 4) | (op2.am << 7)); /* If the PC is the destination... */ if (op2.am == 0 && op2.reg == 0 /* ... and the opcode alters the SR. */ && !(is_opcode ("bic") || is_opcode ("bis") || is_opcode ("mov") || is_opcode ("bicx") || is_opcode ("bisx") || is_opcode ("movx"))) { if (silicon_errata_fix & SILICON_ERRATA_CPU11) as_bad (_("CPU11: PC is destinstion of SR altering instruction")); else if (silicon_errata_warn & SILICON_ERRATA_CPU11) as_warn (_("CPU11: PC is destinstion of SR altering instruction")); } /* If the status register is the destination... */ if (op2.am == 0 && op2.reg == 2 /* ... and the opcode alters the SR. */ && (is_opcode ("add") || is_opcode ("addc") || is_opcode ("and") || is_opcode ("dadd") || is_opcode ("sub") || is_opcode ("subc") || is_opcode ("xor") || is_opcode ("addx") || is_opcode ("addcx") || is_opcode ("andx") || is_opcode ("daddx") || is_opcode ("subx") || is_opcode ("subcx") || is_opcode ("xorx") )) { if (silicon_errata_fix & SILICON_ERRATA_CPU13) as_bad (_("CPU13: SR is destinstion of SR altering instruction")); else if (silicon_errata_warn & SILICON_ERRATA_CPU13) as_warn (_("CPU13: SR is destinstion of SR altering instruction")); } if ( (is_opcode ("bic") && bin == 0xc232) || (is_opcode ("bis") && bin == 0xd232) || (is_opcode ("mov") && op2.mode == OP_REG && op2.reg == 2)) { /* Avoid false checks when a constant value is being put into the SR. */ if (op1.mode == OP_EXP && op1.exp.X_op == O_constant && (op1.exp.X_add_number & 0x8) != 0x8) ; else check_for_nop |= NOP_CHECK_INTERRUPT; } if (((is_opcode ("bis") && bin == 0xd032) || (is_opcode ("mov") && bin == 0x4032) || (is_opcode ("xor") && bin == 0xe032)) && op1.mode == OP_EXP && op1.exp.X_op == O_constant && (op1.exp.X_add_number & 0x10) == 0x10) check_for_nop |= NOP_CHECK_CPU19; /* Compute the entire length of the instruction in bytes. */ op_length = (extended_op ? 2 : 0) /* The extension word. */ + 2 /* The opcode */ + (2 * op1.ol) /* The first operand. */ + (2 * op2.ol); /* The second operand. */ insn_length += op_length; frag = frag_more (op_length); where = frag - frag_now->fr_literal; if (extended_op) { if (!addr_op) extended |= BYTE_OPERATION; if ((op1.ol != 0 || op2.ol != 0) && ((extended & 0xf) != 0)) { as_bad (_("repeat instruction used with non-register mode instruction")); extended &= ~ 0xf; } /* If necessary, emit a reloc to update the extension word. */ if (op1.mode == OP_EXP) { if (op1.exp.X_op == O_constant) extended |= ((op1.exp.X_add_number >> 16) & 0xf) << 7; else if (op1.reg || op1.am == 3) /* Not PC relative. */ fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE, BFD_RELOC_MSP430X_ABS20_EXT_SRC); else fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE, BFD_RELOC_MSP430X_PCR20_EXT_SRC); } if (op2.mode == OP_EXP) { if (op2.exp.X_op == O_constant) extended |= (op2.exp.X_add_number >> 16) & 0xf; else if (op1.mode == OP_EXP) fix_new_exp (frag_now, where, 8, &(op2.exp), FALSE, op2.reg ? BFD_RELOC_MSP430X_ABS20_EXT_ODST : BFD_RELOC_MSP430X_PCR20_EXT_ODST); else fix_new_exp (frag_now, where, 6, &(op2.exp), FALSE, op2.reg ? BFD_RELOC_MSP430X_ABS20_EXT_DST : BFD_RELOC_MSP430X_PCR20_EXT_DST); } /* Emit the extension word. */ bfd_putl16 (extended, frag); where += 2; frag += 2; } bfd_putl16 ((bfd_vma) bin, frag); where += 2; frag += 2; if (op1.mode == OP_EXP) { if (op1.exp.X_op == O_constant) { bfd_putl16 (op1.exp.X_add_number & 0xffff, frag); } else { bfd_putl16 ((bfd_vma) ZEROS, frag); if (!extended_op) { if (op1.reg || op1.am == 3) /* Not PC relative. */ fix_new_exp (frag_now, where, 2, &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1)); else fix_new_exp (frag_now, where, 2, &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL); } } where += 2; frag += 2; } if (op2.mode == OP_EXP) { if (op2.exp.X_op == O_constant) { bfd_putl16 (op2.exp.X_add_number & 0xffff, frag); } else { bfd_putl16 ((bfd_vma) ZEROS, frag); if (!extended_op) { if (op2.reg) /* Not PC relative. */ fix_new_exp (frag_now, where, 2, &(op2.exp), FALSE, CHECK_RELOC_MSP430 (op2)); else fix_new_exp (frag_now, where, 2, &(op2.exp), TRUE, CHECK_RELOC_MSP430_PCREL); } } } dwarf2_emit_insn (insn_length); /* If the PC is the destination... */ if (op2.am == 0 && op2.reg == 0 /* ... but the opcode does not alter the destination. */ && (is_opcode ("cmp") || is_opcode ("bit") || is_opcode ("cmpx"))) check_for_nop |= NOP_CHECK_CPU12; break; case 2: /* Single-operand mostly instr. */ if (opcode->insn_opnumb == 0) { /* reti instruction. */ insn_length += 2; frag = frag_more (2); bfd_putl16 ((bfd_vma) bin, frag); dwarf2_emit_insn (insn_length); break; } line = extract_operand (line, l1, sizeof (l1)); res = msp430_srcoperand (&op1, l1, opcode->bin_opcode, &imm_op, extended_op, TRUE); if (res) break; /* Error in operand. */ if (target_is_430xv2 () && op1.mode == OP_REG && op1.reg == 0 && (is_opcode ("rrax") || is_opcode ("rrcx") || is_opcode ("rra") || is_opcode ("rrc"))) { as_bad (_("%s: attempt to rotate the PC register"), opcode->name); break; } /* If the status register is the destination... */ if (op1.am == 0 && op1.reg == 2 /* ... and the opcode alters the SR. */ && (is_opcode ("rra") || is_opcode ("rrc") || is_opcode ("sxt"))) { if (silicon_errata_fix & SILICON_ERRATA_CPU13) as_bad (_("CPU13: SR is destinstion of SR altering instruction")); else if (silicon_errata_warn & SILICON_ERRATA_CPU13) as_warn (_("CPU13: SR is destinstion of SR altering instruction")); } insn_length = (extended_op ? 2 : 0) + 2 + (op1.ol * 2); frag = frag_more (insn_length); where = frag - frag_now->fr_literal; if (extended_op) { if (is_opcode ("swpbx") || is_opcode ("sxtx")) { /* These two instructions use a special encoding of the A/L and B/W bits. */ bin &= ~ BYTE_OPERATION; if (byte_op) { as_bad (_("%s instruction does not accept a .b suffix"), opcode->name); break; } else if (! addr_op) extended |= BYTE_OPERATION; } else if (! addr_op) extended |= BYTE_OPERATION; if (is_opcode ("rrux")) extended |= IGNORE_CARRY_BIT; if (op1.ol != 0 && ((extended & 0xf) != 0)) { as_bad (_("repeat instruction used with non-register mode instruction")); extended &= ~ 0xf; } if (op1.mode == OP_EXP) { if (op1.exp.X_op == O_constant) extended |= ((op1.exp.X_add_number >> 16) & 0xf) << 7; else if (op1.reg || op1.am == 3) /* Not PC relative. */ fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE, BFD_RELOC_MSP430X_ABS20_EXT_SRC); else fix_new_exp (frag_now, where, 6, &(op1.exp), FALSE, BFD_RELOC_MSP430X_PCR20_EXT_SRC); } /* Emit the extension word. */ bfd_putl16 (extended, frag); frag += 2; where += 2; } bin |= op1.reg | (op1.am << 4); bfd_putl16 ((bfd_vma) bin, frag); frag += 2; where += 2; if (op1.mode == OP_EXP) { if (op1.exp.X_op == O_constant) { bfd_putl16 (op1.exp.X_add_number & 0xffff, frag); } else { bfd_putl16 ((bfd_vma) ZEROS, frag); if (!extended_op) { if (op1.reg || op1.am == 3) /* Not PC relative. */ fix_new_exp (frag_now, where, 2, &(op1.exp), FALSE, CHECK_RELOC_MSP430 (op1)); else fix_new_exp (frag_now, where, 2, &(op1.exp), TRUE, CHECK_RELOC_MSP430_PCREL); } } } dwarf2_emit_insn (insn_length); break; case 3: /* Conditional jumps instructions. */ line = extract_operand (line, l1, sizeof (l1)); /* l1 is a label. */ if (l1[0]) { char *m = l1; expressionS exp; if (*m == '$') m++; parse_exp (m, &exp); /* In order to handle something like: and #0x8000, r5 tst r5 jz 4 ; skip next 4 bytes inv r5 inc r5 nop ; will jump here if r5 positive or zero jCOND -n ;assumes jump n bytes backward: mov r5,r6 jmp -2 is equal to: lab: mov r5,r6 jmp lab jCOND $n ; jump from PC in either direction. */ if (exp.X_op == O_constant) { int x = exp.X_add_number; if (x & 1) { as_warn (_("Even number required. Rounded to %d"), x + 1); x++; } if ((*l1 == '$' && x > 0) || x < 0) x -= 2; x >>= 1; if (x > 512 || x < -511) { as_bad (_("Wrong displacement %d"), x << 1); break; } insn_length += 2; frag = frag_more (2); /* Instr size is 1 word. */ bin |= x & 0x3ff; bfd_putl16 ((bfd_vma) bin, frag); } else if (exp.X_op == O_symbol && *l1 != '$') { insn_length += 2; frag = frag_more (2); /* Instr size is 1 word. */ where = frag - frag_now->fr_literal; fix_new_exp (frag_now, where, 2, &exp, TRUE, BFD_RELOC_MSP430_10_PCREL); bfd_putl16 ((bfd_vma) bin, frag); } else if (*l1 == '$') { as_bad (_("instruction requires label sans '$'")); } else as_bad (_ ("instruction requires label or value in range -511:512")); dwarf2_emit_insn (insn_length); break; } else { as_bad (_("instruction requires label")); break; } break; case 4: /* Extended jumps. */ if (!msp430_enable_polys) { as_bad (_("polymorphs are not enabled. Use -mP option to enable.")); break; } line = extract_operand (line, l1, sizeof (l1)); if (l1[0]) { char *m = l1; expressionS exp; /* Ignore absolute addressing. make it PC relative anyway. */ if (*m == '#' || *m == '$') m++; parse_exp (m, & exp); if (exp.X_op == O_symbol) { /* Relaxation required. */ struct rcodes_s rc = msp430_rcodes[opcode->insn_opnumb]; if (target_is_430x ()) rc = msp430x_rcodes[opcode->insn_opnumb]; /* The parameter to dwarf2_emit_insn is actually the offset to the start of the insn from the fix piece of instruction that was emitted. Since next fragments may have variable size we tie debug info to the beginning of the instruction. */ insn_length += 8; frag = frag_more (8); dwarf2_emit_insn (0); bfd_putl16 ((bfd_vma) rc.sop, frag); frag = frag_variant (rs_machine_dependent, 8, 2, /* Wild guess. */ ENCODE_RELAX (rc.lpos, STATE_BITS10), exp.X_add_symbol, 0, /* Offset is zero if jump dist less than 1K. */ (char *) frag); break; } } as_bad (_("instruction requires label")); break; case 5: /* Emulated extended branches. */ if (!msp430_enable_polys) { as_bad (_("polymorphs are not enabled. Use -mP option to enable.")); break; } line = extract_operand (line, l1, sizeof (l1)); if (l1[0]) { char * m = l1; expressionS exp; /* Ignore absolute addressing. make it PC relative anyway. */ if (*m == '#' || *m == '$') m++; parse_exp (m, & exp); if (exp.X_op == O_symbol) { /* Relaxation required. */ struct hcodes_s hc = msp430_hcodes[opcode->insn_opnumb]; if (target_is_430x ()) hc = msp430x_hcodes[opcode->insn_opnumb]; insn_length += 8; frag = frag_more (8); dwarf2_emit_insn (0); bfd_putl16 ((bfd_vma) hc.op0, frag); bfd_putl16 ((bfd_vma) hc.op1, frag+2); frag = frag_variant (rs_machine_dependent, 8, 2, ENCODE_RELAX (STATE_EMUL_BRANCH, STATE_BITS10), /* Wild guess. */ exp.X_add_symbol, 0, /* Offset is zero if jump dist less than 1K. */ (char *) frag); break; } } as_bad (_("instruction requires label")); break; default: as_bad (_("Illegal instruction or not implemented opcode.")); } if (is_opcode ("nop")) prev_insn_is_nop = TRUE; else prev_insn_is_nop = FALSE; input_line_pointer = line; return 0; } void md_assemble (char * str) { struct msp430_opcode_s * opcode; char cmd[32]; unsigned int i = 0; str = skip_space (str); /* Skip leading spaces. */ str = extract_cmd (str, cmd, sizeof (cmd) - 1); while (cmd[i]) { char a = TOLOWER (cmd[i]); cmd[i] = a; i++; } if (!cmd[0]) { as_bad (_("can't find opcode ")); return; } opcode = (struct msp430_opcode_s *) hash_find (msp430_hash, cmd); if (opcode == NULL) { as_bad (_("unknown opcode `%s'"), cmd); return; } { char *__t = input_line_pointer; msp430_operands (opcode, str); input_line_pointer = __t; } } /* GAS will call this function for each section at the end of the assembly, to permit the CPU backend to adjust the alignment of a section. */ valueT md_section_align (asection * seg, valueT addr) { int align = bfd_get_section_alignment (stdoutput, seg); return ((addr + (1 << align) - 1) & -(1 << align)); } /* If you define this macro, it should return the offset between the address of a PC relative fixup and the position from which the PC relative adjustment should be made. On many processors, the base of a PC relative instruction is the next instruction, so this macro would return the length of an instruction. */ long md_pcrel_from_section (fixS * fixp, segT sec) { if (fixp->fx_addsy != (symbolS *) NULL && (!S_IS_DEFINED (fixp->fx_addsy) || (S_GET_SEGMENT (fixp->fx_addsy) != sec))) return 0; return fixp->fx_frag->fr_address + fixp->fx_where; } /* Replaces standard TC_FORCE_RELOCATION_LOCAL. Now it handles the situation when relocations have to be passed to linker. */ int msp430_force_relocation_local (fixS *fixp) { if (fixp->fx_r_type == BFD_RELOC_MSP430_10_PCREL) return 1; if (fixp->fx_pcrel) return 1; if (msp430_enable_polys && !msp430_enable_relax) return 1; return (!fixp->fx_pcrel || generic_force_reloc (fixp)); } /* GAS will call this for each fixup. It should store the correct value in the object file. */ void md_apply_fix (fixS * fixp, valueT * valuep, segT seg) { unsigned char * where; unsigned long insn; long value; if (fixp->fx_addsy == (symbolS *) NULL) { value = *valuep; fixp->fx_done = 1; } else if (fixp->fx_pcrel) { segT s = S_GET_SEGMENT (fixp->fx_addsy); if (fixp->fx_addsy && (s == seg || s == absolute_section)) { /* FIXME: We can appear here only in case if we perform a pc relative jump to the label which is i) global, ii) locally defined or this is a jump to an absolute symbol. If this is an absolute symbol -- everything is OK. If this is a global label, we've got a symbol value defined twice: 1. S_GET_VALUE (fixp->fx_addsy) will contain a symbol offset from this section start 2. *valuep will contain the real offset from jump insn to the label So, the result of S_GET_VALUE (fixp->fx_addsy) + (* valuep); will be incorrect. Therefore remove s_get_value. */ value = /* S_GET_VALUE (fixp->fx_addsy) + */ * valuep; fixp->fx_done = 1; } else value = *valuep; } else { value = fixp->fx_offset; if (fixp->fx_subsy != (symbolS *) NULL) { if (S_GET_SEGMENT (fixp->fx_subsy) == absolute_section) { value -= S_GET_VALUE (fixp->fx_subsy); fixp->fx_done = 1; } } } fixp->fx_no_overflow = 1; /* If polymorphs are enabled and relax disabled. do not kill any relocs and pass them to linker. */ if (msp430_enable_polys && !msp430_enable_relax) { if (!fixp->fx_addsy || S_GET_SEGMENT (fixp->fx_addsy) == absolute_section) fixp->fx_done = 1; /* It is ok to kill 'abs' reloc. */ else fixp->fx_done = 0; } if (fixp->fx_done) { /* Fetch the instruction, insert the fully resolved operand value, and stuff the instruction back again. */ where = (unsigned char *) fixp->fx_frag->fr_literal + fixp->fx_where; insn = bfd_getl16 (where); switch (fixp->fx_r_type) { case BFD_RELOC_MSP430_10_PCREL: if (value & 1) as_bad_where (fixp->fx_file, fixp->fx_line, _("odd address operand: %ld"), value); /* Jumps are in words. */ value >>= 1; --value; /* Correct PC. */ if (value < -512 || value > 511) as_bad_where (fixp->fx_file, fixp->fx_line, _("operand out of range: %ld"), value); value &= 0x3ff; /* get rid of extended sign */ bfd_putl16 ((bfd_vma) (value | insn), where); break; case BFD_RELOC_MSP430X_PCR16: case BFD_RELOC_MSP430_RL_PCREL: case BFD_RELOC_MSP430_16_PCREL: if (value & 1) as_bad_where (fixp->fx_file, fixp->fx_line, _("odd address operand: %ld"), value); /* Fall through. */ case BFD_RELOC_MSP430_16_PCREL_BYTE: /* Nothing to be corrected here. */ if (value < -32768 || value > 65536) as_bad_where (fixp->fx_file, fixp->fx_line, _("operand out of range: %ld"), value); /* Fall through. */ case BFD_RELOC_MSP430X_ABS16: case BFD_RELOC_MSP430_16: case BFD_RELOC_16: case BFD_RELOC_MSP430_16_BYTE: value &= 0xffff; /* Get rid of extended sign. */ bfd_putl16 ((bfd_vma) value, where); break; case BFD_RELOC_MSP430_ABS_HI16: value >>= 16; value &= 0xffff; /* Get rid of extended sign. */ bfd_putl16 ((bfd_vma) value, where); break; case BFD_RELOC_32: bfd_putl16 ((bfd_vma) value, where); break; case BFD_RELOC_MSP430_ABS8: case BFD_RELOC_8: bfd_put_8 (NULL, (bfd_vma) value, where); break; case BFD_RELOC_MSP430X_ABS20_EXT_SRC: case BFD_RELOC_MSP430X_PCR20_EXT_SRC: bfd_putl16 ((bfd_vma) (value & 0xffff), where + 4); value >>= 16; bfd_putl16 ((bfd_vma) (((value & 0xf) << 7) | insn), where); break; case BFD_RELOC_MSP430X_ABS20_ADR_SRC: bfd_putl16 ((bfd_vma) (value & 0xffff), where + 2); value >>= 16; bfd_putl16 ((bfd_vma) (((value & 0xf) << 8) | insn), where); break; case BFD_RELOC_MSP430X_ABS20_EXT_ODST: bfd_putl16 ((bfd_vma) (value & 0xffff), where + 6); value >>= 16; bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where); break; case BFD_RELOC_MSP430X_PCR20_CALL: bfd_putl16 ((bfd_vma) (value & 0xffff), where + 2); value >>= 16; bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where); break; case BFD_RELOC_MSP430X_ABS20_EXT_DST: case BFD_RELOC_MSP430X_PCR20_EXT_DST: bfd_putl16 ((bfd_vma) (value & 0xffff), where + 4); value >>= 16; bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where); break; case BFD_RELOC_MSP430X_PCR20_EXT_ODST: bfd_putl16 ((bfd_vma) (value & 0xffff), where + 6); value >>= 16; bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where); break; case BFD_RELOC_MSP430X_ABS20_ADR_DST: bfd_putl16 ((bfd_vma) (value & 0xffff), where + 2); value >>= 16; bfd_putl16 ((bfd_vma) ((value & 0xf) | insn), where); break; default: as_fatal (_("line %d: unknown relocation type: 0x%x"), fixp->fx_line, fixp->fx_r_type); break; } } else { fixp->fx_addnumber = value; } } static bfd_boolean S_IS_GAS_LOCAL (symbolS * s) { const char * name; unsigned int len; if (s == NULL) return FALSE; name = S_GET_NAME (s); len = strlen (name) - 1; return name[len] == 1 || name[len] == 2; } /* GAS will call this to generate a reloc, passing the resulting reloc to `bfd_install_relocation'. This currently works poorly, as `bfd_install_relocation' often does the wrong thing, and instances of `tc_gen_reloc' have been written to work around the problems, which in turns makes it difficult to fix `bfd_install_relocation'. */ /* If while processing a fixup, a reloc really needs to be created then it is done here. */ arelent ** tc_gen_reloc (asection * seg ATTRIBUTE_UNUSED, fixS * fixp) { static arelent * no_relocs = NULL; static arelent * relocs[MAX_RELOC_EXPANSION + 1]; arelent *reloc; reloc = XNEW (arelent); reloc->address = fixp->fx_frag->fr_address + fixp->fx_where; reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type); if (reloc->howto == (reloc_howto_type *) NULL) { as_bad_where (fixp->fx_file, fixp->fx_line, _("reloc %d not supported by object file format"), (int) fixp->fx_r_type); free (reloc); return & no_relocs; } relocs[0] = reloc; relocs[1] = NULL; if (fixp->fx_subsy && S_GET_SEGMENT (fixp->fx_subsy) == absolute_section) { fixp->fx_offset -= S_GET_VALUE (fixp->fx_subsy); fixp->fx_subsy = NULL; } if (fixp->fx_addsy && fixp->fx_subsy) { asection *asec, *ssec; asec = S_GET_SEGMENT (fixp->fx_addsy); ssec = S_GET_SEGMENT (fixp->fx_subsy); /* If we have a difference between two different, non-absolute symbols we must generate two relocs (one for each symbol) and allow the linker to resolve them - relaxation may change the distances between symbols, even local symbols defined in the same section. Unfortunately we cannot do this with assembler generated local labels because there can be multiple incarnations of the same label, with exactly the same name, in any given section and the linker will have no way to identify the correct one. Instead we just have to hope that no relaxtion will occur between the local label and the other symbol in the expression. Similarly we have to compute differences between symbols in the .eh_frame section as the linker is not smart enough to apply relocations there before attempting to process it. */ if ((ssec != absolute_section || asec != absolute_section) && (fixp->fx_addsy != fixp->fx_subsy) && strcmp (ssec->name, ".eh_frame") != 0 && ! S_IS_GAS_LOCAL (fixp->fx_addsy) && ! S_IS_GAS_LOCAL (fixp->fx_subsy)) { arelent * reloc2 = XNEW (arelent); relocs[0] = reloc2; relocs[1] = reloc; reloc2->address = reloc->address; reloc2->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_MSP430_SYM_DIFF); reloc2->addend = - S_GET_VALUE (fixp->fx_subsy); if (ssec == absolute_section) reloc2->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr; else { reloc2->sym_ptr_ptr = XNEW (asymbol *); *reloc2->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_subsy); } reloc->addend = fixp->fx_offset; if (asec == absolute_section) { reloc->addend += S_GET_VALUE (fixp->fx_addsy); reloc->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr; } else { reloc->sym_ptr_ptr = XNEW (asymbol *); *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); } fixp->fx_pcrel = 0; fixp->fx_done = 1; return relocs; } else { char *fixpos = fixp->fx_where + fixp->fx_frag->fr_literal; reloc->addend = (S_GET_VALUE (fixp->fx_addsy) - S_GET_VALUE (fixp->fx_subsy) + fixp->fx_offset); switch (fixp->fx_r_type) { case BFD_RELOC_8: md_number_to_chars (fixpos, reloc->addend, 1); break; case BFD_RELOC_16: md_number_to_chars (fixpos, reloc->addend, 2); break; case BFD_RELOC_24: md_number_to_chars (fixpos, reloc->addend, 3); break; case BFD_RELOC_32: md_number_to_chars (fixpos, reloc->addend, 4); break; default: reloc->sym_ptr_ptr = (asymbol **) bfd_abs_section_ptr->symbol_ptr_ptr; return relocs; } free (reloc); return & no_relocs; } } else { #if 0 if (fixp->fx_r_type == BFD_RELOC_MSP430X_ABS16 && S_GET_SEGMENT (fixp->fx_addsy) == absolute_section) { bfd_vma amount = S_GET_VALUE (fixp->fx_addsy); char *fixpos = fixp->fx_where + fixp->fx_frag->fr_literal; md_number_to_chars (fixpos, amount, 2); free (reloc); return & no_relocs; } #endif reloc->sym_ptr_ptr = XNEW (asymbol *); *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); reloc->addend = fixp->fx_offset; if (fixp->fx_r_type == BFD_RELOC_VTABLE_INHERIT || fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY) reloc->address = fixp->fx_offset; } return relocs; } int md_estimate_size_before_relax (fragS * fragP ATTRIBUTE_UNUSED, asection * segment_type ATTRIBUTE_UNUSED) { if (fragP->fr_symbol && S_GET_SEGMENT (fragP->fr_symbol) == segment_type) { /* This is a jump -> pcrel mode. Nothing to do much here. Return value == 2. */ fragP->fr_subtype = ENCODE_RELAX (RELAX_LEN (fragP->fr_subtype), STATE_BITS10); } else if (fragP->fr_symbol) { /* Its got a segment, but its not ours. Even if fr_symbol is in an absolute segment, we don't know a displacement until we link object files. So it will always be long. This also applies to labels in a subsegment of current. Liker may relax it to short jump later. Return value == 8. */ fragP->fr_subtype = ENCODE_RELAX (RELAX_LEN (fragP->fr_subtype), STATE_WORD); } else { /* We know the abs value. may be it is a jump to fixed address. Impossible in our case, cause all constants already handled. */ fragP->fr_subtype = ENCODE_RELAX (RELAX_LEN (fragP->fr_subtype), STATE_UNDEF); } return md_relax_table[fragP->fr_subtype].rlx_length; } void md_convert_frag (bfd * abfd ATTRIBUTE_UNUSED, asection * sec ATTRIBUTE_UNUSED, fragS * fragP) { char * where = 0; int rela = -1; int i; struct rcodes_s * cc = NULL; struct hcodes_s * hc = NULL; switch (fragP->fr_subtype) { case ENCODE_RELAX (STATE_UNCOND_BRANCH, STATE_BITS10): case ENCODE_RELAX (STATE_SIMPLE_BRANCH, STATE_BITS10): case ENCODE_RELAX (STATE_NOOV_BRANCH, STATE_BITS10): /* We do not have to convert anything here. Just apply a fix. */ rela = BFD_RELOC_MSP430_10_PCREL; break; case ENCODE_RELAX (STATE_UNCOND_BRANCH, STATE_WORD): case ENCODE_RELAX (STATE_UNCOND_BRANCH, STATE_UNDEF): /* Convert uncond branch jmp lab -> br lab. */ if (target_is_430x ()) cc = msp430x_rcodes + 7; else cc = msp430_rcodes + 7; where = fragP->fr_literal + fragP->fr_fix; bfd_putl16 (cc->lop0, where); rela = BFD_RELOC_MSP430_RL_PCREL; fragP->fr_fix += 2; break; case ENCODE_RELAX (STATE_SIMPLE_BRANCH, STATE_WORD): case ENCODE_RELAX (STATE_SIMPLE_BRANCH, STATE_UNDEF): { /* Other simple branches. */ int insn = bfd_getl16 (fragP->fr_opcode); insn &= 0xffff; /* Find actual instruction. */ if (target_is_430x ()) { for (i = 0; i < 7 && !cc; i++) if (msp430x_rcodes[i].sop == insn) cc = msp430x_rcodes + i; } else { for (i = 0; i < 7 && !cc; i++) if (msp430_rcodes[i].sop == insn) cc = & msp430_rcodes[i]; } if (!cc || !cc->name) as_fatal (_("internal inconsistency problem in %s: insn %04lx"), __FUNCTION__, (long) insn); where = fragP->fr_literal + fragP->fr_fix; bfd_putl16 (cc->lop0, where); bfd_putl16 (cc->lop1, where + 2); rela = BFD_RELOC_MSP430_RL_PCREL; fragP->fr_fix += 4; } break; case ENCODE_RELAX (STATE_NOOV_BRANCH, STATE_WORD): case ENCODE_RELAX (STATE_NOOV_BRANCH, STATE_UNDEF): if (target_is_430x ()) cc = msp430x_rcodes + 6; else cc = msp430_rcodes + 6; where = fragP->fr_literal + fragP->fr_fix; bfd_putl16 (cc->lop0, where); bfd_putl16 (cc->lop1, where + 2); bfd_putl16 (cc->lop2, where + 4); rela = BFD_RELOC_MSP430_RL_PCREL; fragP->fr_fix += 6; break; case ENCODE_RELAX (STATE_EMUL_BRANCH, STATE_BITS10): { int insn = bfd_getl16 (fragP->fr_opcode + 2); insn &= 0xffff; if (target_is_430x ()) { for (i = 0; i < 4 && !hc; i++) if (msp430x_hcodes[i].op1 == insn) hc = msp430x_hcodes + i; } else { for (i = 0; i < 4 && !hc; i++) if (msp430_hcodes[i].op1 == insn) hc = &msp430_hcodes[i]; } if (!hc || !hc->name) as_fatal (_("internal inconsistency problem in %s: ext. insn %04lx"), __FUNCTION__, (long) insn); rela = BFD_RELOC_MSP430_10_PCREL; /* Apply a fix for a first label if necessary. another fix will be applied to the next word of insn anyway. */ if (hc->tlab == 2) fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset, TRUE, rela); fragP->fr_fix += 2; } break; case ENCODE_RELAX (STATE_EMUL_BRANCH, STATE_WORD): case ENCODE_RELAX (STATE_EMUL_BRANCH, STATE_UNDEF): { int insn = bfd_getl16 (fragP->fr_opcode + 2); insn &= 0xffff; if (target_is_430x ()) { for (i = 0; i < 4 && !hc; i++) if (msp430x_hcodes[i].op1 == insn) hc = msp430x_hcodes + i; } else { for (i = 0; i < 4 && !hc; i++) if (msp430_hcodes[i].op1 == insn) hc = & msp430_hcodes[i]; } if (!hc || !hc->name) as_fatal (_("internal inconsistency problem in %s: ext. insn %04lx"), __FUNCTION__, (long) insn); rela = BFD_RELOC_MSP430_RL_PCREL; where = fragP->fr_literal + fragP->fr_fix; bfd_putl16 (hc->lop0, where); bfd_putl16 (hc->lop1, where + 2); bfd_putl16 (hc->lop2, where + 4); fragP->fr_fix += 6; } break; default: as_fatal (_("internal inconsistency problem in %s: %lx"), __FUNCTION__, (long) fragP->fr_subtype); break; } /* Now apply fix. */ fix_new (fragP, fragP->fr_fix, 2, fragP->fr_symbol, fragP->fr_offset, TRUE, rela); /* Just fixed 2 bytes. */ fragP->fr_fix += 2; } /* Relax fragment. Mostly stolen from hc11 and mcore which arches I think I know. */ long msp430_relax_frag (segT seg ATTRIBUTE_UNUSED, fragS * fragP, long stretch ATTRIBUTE_UNUSED) { long growth; offsetT aim = 0; symbolS *symbolP; const relax_typeS *this_type; const relax_typeS *start_type; relax_substateT next_state; relax_substateT this_state; const relax_typeS *table = md_relax_table; /* Nothing to be done if the frag has already max size. */ if (RELAX_STATE (fragP->fr_subtype) == STATE_UNDEF || RELAX_STATE (fragP->fr_subtype) == STATE_WORD) return 0; if (RELAX_STATE (fragP->fr_subtype) == STATE_BITS10) { symbolP = fragP->fr_symbol; if (symbol_resolved_p (symbolP)) as_fatal (_("internal inconsistency problem in %s: resolved symbol"), __FUNCTION__); /* We know the offset. calculate a distance. */ aim = S_GET_VALUE (symbolP) - fragP->fr_address - fragP->fr_fix; } if (!msp430_enable_relax) { /* Relaxation is not enabled. So, make all jump as long ones by setting 'aim' to quite high value. */ aim = 0x7fff; } this_state = fragP->fr_subtype; start_type = this_type = table + this_state; if (aim < 0) { /* Look backwards. */ for (next_state = this_type->rlx_more; next_state;) if (aim >= this_type->rlx_backward || !this_type->rlx_backward) next_state = 0; else { /* Grow to next state. */ this_state = next_state; this_type = table + this_state; next_state = this_type->rlx_more; } } else { /* Look forwards. */ for (next_state = this_type->rlx_more; next_state;) if (aim <= this_type->rlx_forward || !this_type->rlx_forward) next_state = 0; else { /* Grow to next state. */ this_state = next_state; this_type = table + this_state; next_state = this_type->rlx_more; } } growth = this_type->rlx_length - start_type->rlx_length; if (growth != 0) fragP->fr_subtype = this_state; return growth; } /* Return FALSE if the fixup in fixp should be left alone and not adjusted. We return FALSE here so that linker relaxation will work. */ bfd_boolean msp430_fix_adjustable (struct fix *fixp ATTRIBUTE_UNUSED) { /* If the symbol is in a non-code section then it should be OK. */ if (fixp->fx_addsy && ((S_GET_SEGMENT (fixp->fx_addsy)->flags & SEC_CODE) == 0)) return TRUE; return FALSE; } /* Set the contents of the .MSP430.attributes section. */ void msp430_md_end (void) { if (check_for_nop) as_warn ("assembly finished without a possibly needed NOP instruction"); bfd_elf_add_proc_attr_int (stdoutput, OFBA_MSPABI_Tag_ISA, target_is_430x () ? 2 : 1); bfd_elf_add_proc_attr_int (stdoutput, OFBA_MSPABI_Tag_Code_Model, large_model ? 2 : 1); bfd_elf_add_proc_attr_int (stdoutput, OFBA_MSPABI_Tag_Data_Model, large_model ? 2 : 1); } /* Returns FALSE if there is a msp430 specific reason why the subtraction of two same-section symbols cannot be computed by the assembler. */ bfd_boolean msp430_allow_local_subtract (expressionS * left, expressionS * right, segT section) { /* If the symbols are not in a code section then they are OK. */ if ((section->flags & SEC_CODE) == 0) return TRUE; if (S_IS_GAS_LOCAL (left->X_add_symbol) || S_IS_GAS_LOCAL (right->X_add_symbol)) return TRUE; if (left->X_add_symbol == right->X_add_symbol) return TRUE; /* We have to assume that there may be instructions between the two symbols and that relaxation may increase the distance between them. */ return FALSE; }